Top Fencing Companies in Seattle, WA, 98101 | Compare & Call
There are 221 fencing companies server in Seattle WA
Step By Step Construction is a family-owned and operated business based in Auburn, WA, specializing in wood fence installation and repair. Founded by Agustine, the company brings years of hands-on exp...
ZFC Landscaping, based in Monroe, WA, has been serving the community since 2012. Founded by Oscar, who brings over 15 years of hands-on industry experience, the company operates as a family-run genera...
King's Construction General, based in Renton, WA, specializes in fencing, painting, and roofing services. With Renton's wet climate, wood fence rot is a common problem affecting aging fence systems. W...
Mt Si Contracting specializes in outdoor wooden structures such as decks, fences, gates, and pergolas for residents in Snoqualmie, WA. The company uses materials like cedar and composite decking, desi...
Bergquist Designers & Builders
Bergquist Designers & Builders, based in Mountlake Terrace, WA, has been delivering quality construction since the early 1980s. Founded in Washington, the business expanded to include over a decade of...
Apple Landscape Construction Design is a family-owned business with over 15 years of experience serving Bellevue, WA, and the surrounding King, Pierce, and Snohomish counties. We specialize in landsca...
For 25 years, PNW Solutions & Services has been a trusted licensed home services company in Montesano, WA, specializing in exterior cleaning, pressure washing, and structural enhancements. Based near ...
Prime Home Remodeling
Prime Home Remodeling, based in Bellevue, WA, is your trusted partner for fences, gates, decks, and general contracting needs. Serving neighborhoods from Factoria to Bridle Trails, we specialize in ta...
BFD Construction is a licensed and insured general contractor based in Snoqualmie, WA, serving Seattle and surrounding areas. We specialize in fences, gates, decks, railings, roofing, and outdoor stru...
Vanwest Construction, based in Snohomish, WA, is a small family-owned company that brings over a decade of experience to residential and equestrian projects. We specialize in building and maintaining ...
Estimated Fencing Costs in Seattle, WA
Common Questions
What are the legal requirements for replacing a shared fence?
RCW 16.60.010, the 'Good Neighbor' law, governs partition fences. For a 2026 project, you must provide written notice to your neighbor before altering or replacing a shared boundary fence. Failure to notify can invalidate cost-sharing agreements and lead to civil disputes.
How deep should my fence posts be set in Seattle?
Fence posts require a footing depth of at least 12 inches below the local frost line. In Queen Anne, posts not set below this depth are subject to frost heave, which will crack concrete footings and warp the structure. The International Residential Code (IRC) mandates this for all permanent installations.
What are the height and setback rules for my fence?
Seattle zoning limits fences to 4 feet in front yards and 6 feet in rear yards. The 0-foot setback allows building directly on the property line. Corner lots near I-5 require a clear 'sight triangle' for driver visibility; any fence in this zone must be under 3 feet tall and non-solid.
What materials work best with Seattle's soil and pest conditions?
Moderate soil corrosivity and slight-to-moderate termite risk dictate material choice. Use pressure-treated wood rated for ground contact or corrosion-resistant metals like aluminum. All fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks that degrade appearance and structure.
What is required before breaking ground on a fence?
You must contact Washington 811 for a full utility locate at least three business days before digging. Hitting a gas or fiber line in Queen Anne is a major liability with fines and repair costs. We manage all Seattle Department of Construction and Inspections (SDCI) permit paperwork to ensure the project is legal from the start.
How soon can a consultation be scheduled?
Consultations are scheduled based on current project load. A standard route from Kerry Park uses I-5 for direct access to Queen Anne, with a typical travel time of 35-45 minutes. We confirm a 2-hour arrival window the business day prior to the site visit.
What modern features are required for a pool fence with a smart gate?
All pool barriers must comply with IBC/IRC Appendix AG, requiring self-closing and self-latching gates. High smart-gate trend systems integrate IoT latches that log access and send tamper alerts. This integration meets Washington's modern liability standards by providing digital proof of compliance.
How is my fence designed to handle Seattle's wind storms?
The design uses a V-ult wind speed of 105 MPH per ASCE 7-22 standards. This engineering dictates closer post spacing (often 6 feet on-center), deeper concrete footings, and wind-rated brackets. This ensures the structure survives peak storm season gusts, especially on exposed sites near Kerry Park.
