Top Fencing Companies in Tacoma, WA, 98401 | Compare & Call
There are 235 fencing companies server in Tacoma WA
Black Diamond Builders, based in Mukilteo, WA, brings over 15 years of experience in general contracting, flooring, and fences & gates. We specialize in a wide range of services, from bathroom and kit...
The Zorro NW Const in Everett, WA, specializes in siding, home cleaning, and fences & gates. For local homeowners, fence post decay is a common issue due to the region's wet climate. The Zorro NW Cons...
Aris Landscaping in Everett, WA, focuses on turning outdoor spaces into functional and attractive areas. We handle routine lawn mowing, weeding, and pruning, alongside specialized landscaping and seas...
Royal Garden provides landscape architecture, design, and maintenance services to homeowners and businesses in Bothell, WA. We specialize in transforming outdoor spaces into elegant, clean, and functi...
Joel Fencing, based in Everett, WA, specializes in residential fences and gates, offering reliable solutions for common local fencing problems. Homeowners in neighborhoods like Port Gardner and the Ba...
Two Six Six General Contractors, based in Bellingham, WA, serves homeowners across Whatcom County with a full range of exterior and interior services. Our team handles fence and gate installation, rep...
Ovalle Landscaping & Construction, based in Marysville, WA, specializes in landscaping, decks, fences, and gates. Many local homes face common fencing issues like leaning posts or storm-damaged sectio...
CCC Services is a family-owned, bilingual company based in Lake Stevens, WA, specializing in masonry, concrete, decks, railing, fences, and gates. They offer deck construction, repair, and replacement...
A-Z Renovations is a general contractor based in Marysville, WA, with over 22 years of experience in residential and commercial construction. Owner-operated and locally focused, we handle a wide range...
Precision Home Improvement specializes in fences and gates in Everett, WA, helping homeowners tackle common local issues like gate latch failures and moss growth on fence surfaces. Whether near the hi...
Estimated Fencing Costs in Tacoma, WA
Common Questions
Am I legally required to notify my neighbor before building a fence?
Yes. For any fence replacing a shared boundary, Washington's Good Neighbor Fence Law (RCW 16.60.020) requires written notice to adjoining landowners. As of 2026, Tacoma enforces this strictly to define shared cost liability before construction starts.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic, self-latching mechanisms satisfy the 2026 IBC Section 3109 and IRC Appendix AG requirements for barrier pools. They provide audit trails and remote monitoring, which is a best practice for Washington homeowner liability.
What fencing materials hold up best in Tacoma's soil?
Material compatibility is critical due to moderate soil corrosivity and slight-to-moderate termite risk. Pressure-treated wood or composite materials are standard. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corroding hardware, which is a common failure point.
How soon can a consultation be scheduled in the Uptown district?
Consultations are typically scheduled within 48 hours. Our route from Point Defiance Park via I-5 to the Uptown neighborhood allows for a 25-35 minute response window. We confirm the appointment after reviewing your site's zoning and survey details.
How deep should fence posts be set in Tacoma?
Posts must be set below the 12-inch frost line. In the Uptown neighborhood, frost heave will push posts set in shallow footings out of alignment. IRC Section R403.1.4 requires footings to extend a minimum of 12 inches below undisturbed soil to prevent structural failure from freeze-thaw cycles.
What are Tacoma's height and setback rules for fences?
Zoning limits are 3.5 feet for front yards and 6 feet for rear yards. The setback is 0 feet, allowing construction on the property line. Corner lots must maintain a clear 'sight triangle' at intersections; a fence near I-5 on-ramps cannot obstruct driver visibility, per Tacoma Municipal Code.
Is my fence designed for Tacoma's wind loads?
Fences in Tacoma must be engineered for a V-ult wind speed of 105 mph per ASCE 7-22 standards. This rating dictates maximum post spacing, concrete footing mass, and bracket strength. Proper design prevents failure during our peak storm season, especially in exposed areas.
What is required before digging fence post holes?
You must contact Washington 811 for a utility locate at least two business days before excavation. Hitting a buried line in Uptown is a major liability involving repair costs and fines. A professional manages this and pulls the required right-of-way permit from the City of Tacoma Permit Office.
