Top Fencing Companies in Town and Country, WA, 99208 | Compare & Call
There are 239 fencing companies server in Town And Country WA
Cruz Construction & Renovation LLC is a family-owned general contracting company based in Bothell, WA, founded by Jose “Cruz” Monterrosa. The name Cruz honors his grandfather, a home builder, and refl...
Evergreen Electric Gates And Fences has served Kent, WA, since 2008, providing fence and gate installation, repair, and finishing for residential and commercial properties. As a local fence company, w...
NW Fencing Construction, based in Bothell, WA, has been serving local residents since November 2022. As a licensed (NWFENFC776K), insured, and bonded general contractor, our team brings over a decade ...
Fences NW, based in Mill Creek, has been building fences and decks since 2016 with a focus on quality materials, clean work, and reliability. After navigating industry challenges like rising costs and...
Gate Technologies, based in Auburn, WA, has been a trusted provider of fence and gate services for nearly a decade. As a licensed, bonded, and insured general and specialty electrical contractor, they...
Ivan, manager of Tidy Beaver Fencing in Redmond, WA, leads a team dedicated to redefining fence and deck installation. Founded in 2024, our company prioritizes quality, customer experience, and speed....
Rock Solid Fence is a family-owned fence company serving Marysville, WA, since 2016. Founded by a husband-and-wife team with years of hands-on experience, we specialize in installing and repairing vin...
PNW Legacy Fencing is your trusted local expert for fences, gates, decks, and railing in Lake Stevens, WA. We specialize in fence and gate installation, painting/staining, and weatherproofing to prote...
Constellation Fences, based in Kent, WA, specializes in custom iron gates and iron fence installation for both residential and commercial properties. Our team focuses on high-quality fabrication and d...
Earthscapes has been serving Woodinville and the surrounding areas since 2002, specializing in creating custom outdoor living spaces. As a licensed and insured landscaping company, we offer a full ran...
Estimated Fencing Costs in Town and Country, WA
Questions and Answers
Is a standard fence strong enough for the wind in this area?
No. The 105 MPH V-ult wind speed rating requires engineered resistance. Standard 8-foot panel spacing often fails. Design must use closer post spacing (6-foot centers are typical), reinforced concrete footings, and wind-rated brackets to survive peak storm season gusts, especially for properties with exposure from Riverside State Park.
Can I have a smart, automated gate if I have a pool?
Yes, but integration is key. The IBC/IRC Appendix AG pool code mandates a self-closing, self-latching gate with a latch 48 inches above grade. Modern IoT gate operators can integrate certified latching hardware, meeting both Washington liability standards and the moderate smart-gate trend for automated access control and monitoring.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Washington's 'Good Neighbor' law, RCW 16.60.020, requires written notice to adjoining landowners before replacing or building a shared boundary fence (partition fence). In Town and Country, this is a strict legal prerequisite, not a courtesy. Provide notice and allow for a reasonable response period before any work begins.
What is the first step before digging fence post holes?
Call Washington 811 at least two full business days before any excavation. This free utility locate service is mandatory. Hitting a buried line in Town and Country Estates incurs major repair costs, liability, and project delays. We manage the 811 ticket and coordinate any required Town and Country permit office paperwork as part of the project scope.
How soon can a specialist visit my property for a consultation?
A structural perimeter specialist can typically be dispatched within 2-3 business days. The standard route from the Riverside State Park area via US-2 allows for a 25-35 minute response time to most properties in the Town and Country Estates neighborhood for an initial site evaluation and project scoping.
What are the height and setback rules for fences in Town and Country?
Zoning limits are 3 feet in front yards and 6 feet in rear and side yards, with a 0-foot setback allowing installation directly on the property line. Critical exception: corner lots must maintain a clear 'sight triangle' at intersections. Fences near US-2 require particular attention to this visibility zone for pedestrian and driver safety.
What fencing materials hold up best to local soil and pests?
Given the low-to-moderate soil corrosivity index and moderate termite risk, material compatibility is critical. Pressure-treated wood, cedar, and composite materials perform well. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Avoid untreated wood in direct ground contact and specify termite shields for critical posts.
How deep should my fence posts be set in Town and Country to prevent heaving?
Posts must be set a minimum of 24 inches below grade, below the local frost line. IRC Section R403.1.4.1 mandates this depth to prevent frost heave, a primary cause of post failure and racking in the Town and Country Estates neighborhood. In low spots, footings may require deeper excavation to ensure stability.
