Top Fencing Companies in Ashford, WI, 53010 | Compare & Call
There are 93 fencing companies server in Ashford WI
Able Fence is a family-owned fencing company serving Milwaukee, WI, with over 30 years of experience. Founded in 1996 in St. Louis, MO, the business moved to Milwaukee and now employs 10 people. Steve...
Brothers Rodriguez Landscaping
Brothers Rodriguez Landscaping, based in Waukesha, WI, provides professional outdoor services for both residential and commercial properties. With five years of experience, the company handles landsca...
I grew up building fences and later became a carpenter, starting my company to provide quality fencing and deck services for others in Milwaukee. With over 25 years of experience, we specialize in res...
Superior Fence & Rail of Milwaukee provides professional fence and gate installation services to homeowners and businesses in Cedarburg, WI. Located just off Highway 181 and near the historic Cedar Cr...
Jeff The Fence Guy has been serving West Allis, WI, and nearby neighborhoods like the areas around State Fair Park and Miller Park, providing reliable fence and gate services for over a decade. Many l...
Since 1945, Badger Fence has been serving the metro Milwaukee area with professional fence and gate solutions. As a licensed, insured, and bonded company, we offer residential and commercial installat...
C & M Fencing is a family-owned fencing company based in New Berlin, WI, serving Southeast Wisconsin since 2014. With over 29 years of combined experience, we specialize in both residential and commer...
MC Landscaping serves homeowners across Milwaukee, WI, offering a full range of outdoor services including fence and gate installation, repair, painting, staining, and weatherproofing, as well as gard...
Tab Quality Remodeling is a local Oak Creek company specializing in decks, railings, fences, gates, and siding. We go beyond building new structures—our team also restores existing decks and fences, h...
Munson Fence & Paving has served the Greater Milwaukee area since 1955, offering commercial fencing, asphalt paving, and nationally recognized tennis court construction. Based in Milwaukee, the compan...
Estimated Fencing Costs in Ashford, WI
Q&A
What are the height and setback rules for fences in Ashford?
Ashford zoning limits fences to 4 feet in front yards and 6 feet in rear yards. A 0-foot setback is permitted, allowing construction directly on the property line. Critical exception: corner lots must maintain clear 'sight triangles' for driver visibility. Fences near the intersection with US-45 cannot obstruct the view, per municipal traffic safety codes.
Am I legally required to notify my neighbor before building a fence in Ashford?
Yes, for any fence on a shared boundary. Wisconsin Statute 90.03, the 'good neighbor' law, requires written notice to the adjoining landowner at least 30 days before construction begins in 2026. This formal notification is a prerequisite for establishing a legal 'partition fence' and avoids future disputes over maintenance costs.
How deep do fence posts need to be set in Ashford to prevent heaving?
Posts must extend below the 48-inch frost line. In Ashford Center's clay-rich soil, footings that stop above this depth will move during freeze-thaw cycles, causing catastrophic failure of the assembly. IRC Section R403.1.4 mandates this depth for frost-protected shallow foundations, which we apply to structural perimeter posts.
How is a fence engineered to survive Ashford's high winds?
The design is governed by the 115 MPH V-ult wind speed rating. This ultimate design wind speed, per ASCE 7-22 standards, dictates post spacing, concrete footing mass, and bracket strength. For the peak storm season, we calculate loads to ensure the fence assembly resists overturning and racking forces from gusts channeled through the Ashford Center landscape.
What fencing materials hold up best against Ashford's soil and pests?
Material compatibility is critical. The moderate soil corrosivity index and slight to moderate termite risk demand careful selection. Pressure-treated Southern Yellow Pine posts, rated for ground contact, are standard. Use stainless steel or triple-galvanized (G185) fasteners to prevent rust streaks on siding. Avoid untreated wood in direct soil contact.
What are the required steps before digging fence post holes?
You must contact Diggers Hotline (Wisconsin 811) at least three business days before excavation. Hitting an unmarked utility line in Ashford Center carries major financial and criminal liability. We manage this ticket and concurrently file any required paperwork with the Ashford permit office to ensure the project starts with full clearance.
How soon can a consultation be scheduled in Ashford?
Our standard dispatch for a site consultation involves routing from the Ashford Town Hall landmark via US-45. Given current traffic patterns, expect a 35-45 minute travel window to most neighborhoods. We typically schedule assessments within 3-5 business days, contingent on the utility locate clearance and permit review status.
Do smart gates meet Wisconsin pool fence requirements?
Yes, if properly integrated. The IBC/IRC Appendix AG pool code requires self-closing, self-latching gates with latches mounted at least 54 inches high. A smart gate's IoT actuator can fulfill the self-closing mechanism, but the physical latch must still meet the code's anti-defeat standards. While smart gate adoption is low in Ashford, this integration is the modern standard for liability protection.