Top Fencing Companies in Baldwin, WI, 54002 | Compare & Call
There are 76 fencing companies server in Baldwin WI
Yutka Fence has been a family-owned staple in Kenosha since 1968, when Paul Yutka turned his Air Force experience into a fence contracting business. Today, I run the company alongside my father and my...
M & M Management Property in Milwaukee, WI, specializes in landscaping, masonry and concrete work, and fencing. Our team brings years of practical experience to every project, from earthmoving and reg...
Scorpion Stain serves Pewaukee and the Lake Country and Metro Milwaukee areas as a dedicated wood care contractor. We specialize in fence and deck construction, refinishing, and repair, and also handl...
SDL Landscaping, serving Greenfield, WI, offers expert tree services, lawn care, and fence and gate installation. A common local issue is aging wooden fences that lean, rot, or have loose posts due to...
All Style Quality Fence is a family-owned business serving Brookfield and the Greater Milwaukee area since 2005, with fencing experience dating back to 1983. The company specializes in residential woo...
Wood Knot Fence is a local fencing company serving Wauwatosa, WI, and the surrounding areas. We specialize in fence and gate installation, repair, painting, staining, and weatherproofing for both manu...
S&S Fence Co. is a locally owned and operated fence company based in Kenosha, Wisconsin. Founded in 2015 by a Bradford High School graduate and Decker College alumnus with a degree in applied science ...
The Fence Master provides expert fence and gate services for residential, commercial, and agricultural properties throughout Milwaukee, WI. With years of experience, we specialize in designing, constr...
JCR Landscaping Services LLC, based in Racine, WI, has been improving outdoor spaces in southeastern Wisconsin for over 15 years. We handle the full scope of property care, from landscape design and l...
A-1 Fence Company, under owner Dave Dezutel since 1977, has served Saukville and the greater Milwaukee area with premium fence building and installation. The business stands out by milling its own woo...
Estimated Fencing Costs in Baldwin, WI
Common Questions
What fencing materials work best for Baldwin's soil and pest conditions?
Baldwin has moderate soil corrosivity and a moderate termite risk. Galvanized steel posts and aluminum alloys are recommended for corrosion resistance. Use stainless steel or hot-dipped galvanized fasteners to prevent unsightly rust streaks. Pressure-treated wood is a standard choice, but requires proper ground clearance to deter pests.
Do I need to notify my neighbor before building a fence?
Yes. Wisconsin Statutes Section 90.03, the 'Good Neighbor Fence Law,' requires written notice for work on a shared partition fence. As of 2026, you must provide this notification in the City of Baldwin before any replacement or major repair on a shared boundary line.
How soon can a crew start a fencing project in Baldwin Village?
Our standard dispatch for a consultation is 1-3 business days. The route from the Baldwin Municipal Airport via I-94 allows for a consistent 15-20 minute response time to most addresses in the village for initial site assessment and planning.
What are the height and setback rules for fences in Baldwin?
The zoning code enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards. Baldwin allows a 0-foot setback, meaning a fence can be built directly on the property line. Corner lots near I-94 must maintain clear 'sight triangles' at intersections for driver visibility; any fence in that zone is typically prohibited.
How deep should fence posts be set in Baldwin?
Posts require a 48-inch footing to prevent frost jacking. The International Residential Code (IRC) R403.1.4.1 mandates footings below the frost line. In Baldwin Village, posts set in shallower holes will heave each winter, causing permanent structural failure and misalignment.
What are the critical steps before digging fence post holes?
You must contact Diggers Hotline (811) at least three business days before excavation. Hitting an unmarked utility line in Baldwin Village carries major financial and safety liability. A professional crew will manage this locate request and any required permit paperwork with the local building authority as part of the project scope.
What are the modern requirements for a pool fence with a gate?
The Wisconsin Uniform Dwelling Code (UDC) SPS 321.33 mandates self-closing, self-latching gates that open outward. Modern liability standards are met by integrating solar-powered IoT latches, a rising trend. These systems provide automated alerts and access logs, enhancing security beyond the base code.
Is my fence designed for high winds?
A fence in Baldwin must be engineered for a V-ult wind speed of 115 MPH per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. Proper design prevents failure during peak storm season gusts, which are common given the open exposure near the Baldwin Municipal Airport.
