Top Fencing Companies in Clifton, WI, 54021 | Compare & Call
There are 110 fencing companies server in Clifton WI
Leading Edge Fences is a family-owned fencing and deck company based in Marshall, WI, with roots stretching back three generations. Kyle, our third-generation fencer and owner, brings over a decade of...
Dane County Fence & Deck serves Madison and the surrounding Dane County area with residential and commercial fence and deck services. The company specializes in custom fence installations, deck constr...
American Fence Co is a family-owned fence contractor serving Madison, WI, and surrounding communities like Middleton, Sun Prairie, and the UW-Madison campus area. Specializing in residential and comme...
Madison Fence Company, based in Middleton, WI, is a family-owned business that has helped hundreds of homeowners, property managers, and general contractors across the greater Madison area achieve pri...
Qual Line Fence Corp., a family-owned business founded in 1956 by Ray Statz, has been serving southern Wisconsin from Waunakee for over six decades. Now led by CEO Al Statz, the company specializes in...
Since 1995, Ideal Fence of Madison has been installing custom wood and vinyl fences in the Madison area and across two Wisconsin locations. Owner Scott and his team take pride in getting out of the of...
Action Fence has been serving Madison, WI, for over 35 years, specializing in fence and gate installation, repair, staining, and weatherproofing for both residential and commercial properties. We work...
DeSelle Fence Co. has been serving Madison, WI, for over 35 years as a family-owned fencing contractor. Specializing in custom wood, vinyl, chain link, and ornamental iron fences, they provide install...
Good Neighbor Fencing has been serving Middleton, WI, and the surrounding areas since 2014, offering custom fencing solutions for both residential and commercial properties. We specialize in installin...
AmeriFence Corporation of Madision
AmeriFence Corporation of Madison serves McFarland and the surrounding area from its facility at 4701 McFarland Court. As a full-service fencing contractor, we offer professional installation, repair,...
Estimated Fencing Costs in Clifton, WI
Q&A
What are the height and setback rules for fences in Clifton?
Clifton zoning limits fences to 4 feet in the front yard and 6 feet in the rear yard. The setback regulation is 0 feet, meaning fences can be built directly on the property line. For corner lots near WI-27, a 10-foot visibility 'sight triangle' must be maintained from the property corner for driver safety.
What preparation is required before digging fence post holes?
State law requires contacting Diggers Hotline of Wisconsin (811) at least three business days before excavation. Hitting a buried utility line in Clifton Center is a major liability for repair costs and service disruption. A professional installer manages the 811 ticket and coordinates any necessary Clifton permit office paperwork.
Why are fence footings so deep in Clifton?
Clifton's 48-inch frost line requires footings set below that depth. Posts installed in Clifton Center's clay soils will heave upward during winter freeze-thaw cycles if footings are too shallow. IRC Section R403.1.4.1 mandates frost protection to prevent structural failure.
What are my legal duties to my neighbor when building a fence in Wisconsin?
Wisconsin Statute 90.03, the 'Good Neighbor Fence Law,' governs shared boundaries. For any fence replacing a shared boundary line, the 2026 legal requirement is to provide written notice to the adjoining owner at least 30 days before construction begins. This statute outlines cost-sharing responsibilities.
How do you build a fence to withstand high winds?
Clifton's 115 MPH V-ult wind speed rating dictates structural design. Engineering to ASCE 7-22 standards requires reduced post spacing (often 6-8 feet on-center), concrete footings below the frost line, and wind-rated tension brackets. This design resists peak storm season gusts common from WI-27's open exposure.
Do smart gates meet modern safety codes?
Yes, when properly integrated. The International Swimming Pool and Spa Code (ISPSC) requires self-closing, self-latching gates for pools. Modern IoT gate systems with integrated auto-latching meet this standard. The low-to-moderate smart gate trend in Clifton reflects a move toward systems that combine security with automated compliance.
How soon can a consultation and project start occur?
Initial consultations are scheduled within 1-3 business days. The standard dispatch route from the Clifton Town Hall via WI-27 results in a 25-35 minute travel time to most Clifton Center locations. Project start dates depend on material lead times and the utility locate clearance from Diggers Hotline.
Which fence materials work best with Clifton's soil and pests?
Clifton's moderate soil corrosivity index requires G90 galvanized steel fasteners and hardware to prevent rust streaks. The moderate termite risk level makes pressure-treated wood, composite, or metal posts more durable than untreated wood. Material compatibility prevents premature decay and maintenance issues.