Top Fencing Companies in Combined Locks, WI, 54113 | Compare & Call

There are 15 fencing companies server in Combined Locks WI

Deck By Design

Deck By Design

Howard WI 54313
Decks & Railing, General Contractors, Fences & Gates

With over 30 years of experience, Decks by Design is a trusted name for deck construction, repair, replacement, and building additions in Howard, WI, and the greater Green Bay area. We specialize in c...

The Complete Carpenter

The Complete Carpenter

Oconto WI 54153
Fences & Gates, Door Sales/Installation

The Complete Carpenter, based in Oconto, WI, brings over 20 years of expertise in carpentry to both residential and commercial clients. Specializing in door installation, fences, gates, and outdoor st...

Matti's Restoration

Matti's Restoration

Appleton WI 54914
Flooring, Fences & Gates, Siding

Matti's Restoration serves Appleton, WI, and the Fox Valley area with interior and exterior home improvement services. Founded on a commitment to craftsmanship and competitive pricing, the company spe...

Rc Fencing

Rc Fencing

Kaukauna WI 54130
Fences & Gates

Rc Fencing is a trusted fence and gate contractor serving Kaukauna, WI, and the surrounding Fox Valley area. Whether you live near the 1000 Islands Environmental Center or in the historical neighborho...

Phoenix Decking

Phoenix Decking

Wrightstown WI 54180
Decks & Railing, Fences & Gates

Phoenix Decking in Wrightstown, WI, brings over six years of experience to deck and fence projects throughout the area. We design and build custom decks that match your vision, from new construction t...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Combined Locks, WI

Emergency Fence/Gate RepairStorm / Security Response
$384 - $519
Wood Privacy Fence (Per LF)Estimated Range
$34 - $54
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $74
Chain Link Installation (Per LF)Estimated Range
$24 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$59 - $84
Standard Driveway Gate InstallEstimated Range
$1,384 - $1,854

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Combined Locks. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What are the neighbor notification requirements for a fence in Wisconsin?

Wisconsin Statute Section 90.03 requires written notice to adjacent owners before replacing a shared 'partition fence.' Since May 2026, this applies to all boundary work in Combined Locks. Documentation is key for liability.

How do smart gates integrate with pool safety codes?

A smart IoT gate latch must still meet IBC/IRC standards: self-closing, self-latching, and 48 inches high. Integrated sensors can log access, which meets 2026 liability standards for Wisconsin homeowners with pools.

How does the 115 MPH V-ult wind rating affect fence design?

The 115 MPH V-ult wind speed is an ultimate design load per ASCE 7-22. This dictates post spacing, concrete footing mass, and bracket strength to survive peak storm season gusts, especially in open areas near I-41.

What is the utility location process before digging?

State law requires a call to Diggers Hotline (811) at least three business days before excavation. Hitting a gas or fiber line in the Village Center is a major liability. We manage this and all Village permit paperwork.

Why are deep footings critical for a fence in Combined Locks?

The Combined Locks Village Center has a 48-inch frost line. IRC standards require footings 12 inches below this line to prevent frost heave. Shallow posts will lift and fail within two winters.

What are the Combined Locks zoning rules for fence height and placement?

The code is 3 feet for front yards, 6 feet for rear yards. A 0-foot setback means you can build on the property line with a certified survey. Corner lots near I-41 require an unobstructed sight triangle for driver visibility.

What fence materials work best for Combined Locks soil and pests?

Moderate soil corrosivity and slight termite risk require material compatibility. Use pressure-treated wood rated for ground contact or vinyl. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks.

What is your typical response time for a consultation in Combined Locks?

From our base near Memorial Park, we route via I-41. A site consultation in the Combined Locks Village Center typically occurs within 15-20 minutes of dispatch for a scheduled appointment.



Scroll to Top
CALL US NOW