Top Fencing Companies in Grand Rapids, WI, 54494 | Compare & Call

There are 44 fencing companies server in Grand Rapids WI

J & M Fence

J & M Fence

Menasha WI 54952
Fences & Gates

J & M Fence, based in Menasha, WI, specializes in fence installation, repair, and gate services for residential and commercial properties. For many homes in the area, common fencing issues include lea...

Lakeside Fencing

Lakeside Fencing

229 Sunset Dr, Neenah WI 54952
Fences & Gates

Located in Neenah, WI, Lakeside Fencing provides durable fence and gate solutions for local homeowners. Many properties near areas like the Fox River, Shattuck Park, and the historic downtown face cha...

Winnebago Fence

Winnebago Fence

Neenah WI 54956
Fences & Gates

Winnebago Fence is a local, family-owned fence and gate contractor serving Neenah, WI, and the Fox Valley area. We understand that Neenah homeowners often face fencing issues like storm damage from La...

Family Contracting

Family Contracting

W5702 Quarry Rd, Appleton WI 54913
Fences & Gates, Pressure Washers, Decks & Railing

Family Contracting, based in Appleton, WI, specializes in fences, gates, decks, and pressure washing. Many local homes face fencing issues like rot, storm damage, and weather wear—especially in neighb...

« Previous PagePage 5 of 5Next »


Estimated Fencing Costs in Grand Rapids, WI

Emergency Fence/Gate RepairStorm / Security Response
$384 - $519
Wood Privacy Fence (Per LF)Estimated Range
$34 - $54
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $74
Chain Link Installation (Per LF)Estimated Range
$24 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$59 - $84
Standard Driveway Gate InstallEstimated Range
$1,384 - $1,854

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Grand Rapids. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

What are the neighbor notification rules for a fence?

Wisconsin Statute 90.03, the 'Good Neighbor' law, requires written notice to adjacent landowners before constructing or replacing a shared boundary fence. In Grand Rapids, this is a specific 2026 legal requirement to avoid disputes over partition fence costs and maintenance.

How tall can my fence be and where can I put it?

Grand Rapids zoning enforces a 4-foot height limit in front yards and 6-foot in rear yards. The setback regulation allows a 0-foot setback, meaning you can build on the property line. For corner lots near WI-54, you must maintain clear visibility 'sight triangles' at intersections for traffic safety.

What fencing material works best here?

Material compatibility is critical. With a low to moderate soil corrosivity index and a slight/moderate termite risk, pressure-treated wood and vinyl are common. We use hot-dipped galvanized or stainless steel fasteners to prevent rust streaks and ensure long-term durability.

How soon can you start a consultation?

We can schedule a site consultation quickly. Our route from Veterans Memorial Park via WI-54 typically results in a 15-20 minute response time to the West Side. We assess your property lines, wind exposure, and zoning requirements during this first visit.

Is my fence built for high winds?

Yes. The design is based on the 115 MPH V-ult wind speed. This engineering rating dictates post spacing, concrete footing size, and bracket strength. Our builds use ASCE 7-22 standards to survive peak storm season gusts common in this region.

Why do posts need to be set so deep in Grand Rapids?

The local frost line depth is 48 inches. Frost heave will lift and crack posts set above this depth, causing structural failure. We follow IRC standards, setting all posts in the West Side below this line to ensure footing stability for the 115 MPH V-ult wind load rating.

What happens before you dig?

We call Diggers Hotline (811) to mark all underground utilities. Hitting a gas or power line in the West Side is a major liability. We also manage all permit office paperwork with the city to ensure the project meets local zoning and building codes before any work starts.

Can I have a smart gate for my pool?

Yes. While the smart gate trend is low-moderate here, integrated IoT latches can meet the state pool safety code. The code requires a self-closing, self-latching gate with a 48-inch minimum height. A properly integrated system meets modern liability standards for Wisconsin homeowners.



Scroll to Top
CALL US NOW