Top Fencing Companies in Holland, WI, 54636 | Compare & Call
There are 85 fencing companies server in Holland WI
CB Silt Fence LLC, based in Lodi, WI, provides professional landscaping, fencing, and snow removal services across Columbia, Dane, Sauk, Dodge, and Richland counties. With over a decade of experience,...
R&M Home Care & Improvement is a trusted local provider of lawn services, fence and gate installation, and gutter maintenance in Blanchardville, WI. Located near the historic downtown square and just ...
Postville Blacksmith
Postville Blacksmith Shop in Blanchardville, WI, specializes in custom architectural metalwork, decks, railings, fences, and gates. Serving the Blanchardville area, we help homeowners boost curb appea...
N&S Fence is a locally owned fence contractor based in Edgerton, WI, serving Rock, Dane, Jefferson, and Green counties. We specialize in a full range of fencing solutions, including aluminum vinyl, ch...
Hometown Pressure Washing, based in Sun Prairie, WI, provides professional exterior cleaning for homeowners and businesses. We specialize in pressure washing and soft washing to remove dirt, grime, mo...
Go Ghetters Construction serves Portage, WI, with expert deck, fence, and window services. Many local homes face fencing issues like weather damage and wear from seasonal changes. The team provides re...
Fellow Fencing has been serving Eau Claire, WI, and the surrounding Chippewa Valley for years, specializing in fences and gates that stand up to local weather. From the historic Water Street district ...
Dog Guard of Janesville provides invisible pet containment systems designed to keep your furry friends safe within your property boundaries. Serving the Janesville, WI area, including neighborhoods ne...
Phillips Outdoor Services
Since 1975, Phillips Outdoor Services in Onalaska, WI, has grown from a small chain link fence operation into a full-service provider of premium fencing, decking, and landscaping solutions. We serve l...
TLC Handyman Services
TLC Handyman Services is a locally owned handyman business serving West Salem, La Crosse, Onalaska, and Holmen, WI. Founded by a Master's in Mechanical Engineering graduate and high school valedictori...
Estimated Fencing Costs in Holland, WI
Questions and Answers
Is a standard fence design strong enough for Holland's wind loads?
No. The 115 MPH V-ult wind speed rating dictates engineering. Standard 8-foot post spacing often fails. Design must use reduced post spacing, continuous concrete footings below frost, and wind-rated brackets to survive peak storm season gusts, which are amplified near open areas around I-43.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Wisconsin Statute 90.03, the 'good neighbor' law, requires written notice to adjoining landowners before constructing or replacing a partition fence on a shared boundary. As of 2026, this formal notification is a prerequisite in Holland to avoid legal disputes over shared maintenance costs.
What is required before digging fence post holes?
You must contact Diggers Hotline (811) at least three business days before excavation. Hitting a utility line in Holland Center is a major financial and safety liability. A proper installation manages this call and all necessary Town Hall permit office paperwork before any equipment arrives on site.
How deep do fence posts need to be in Holland, WI, to prevent frost heave?
Posts must be set below the 48-inch frost line. The IRC requires this depth to prevent frost heave from lifting posts out of the ground. In Holland Center, soil freeze-thaw cycles will fail any footing set above this line, causing racking and collapse.
How soon can a consultation be scheduled, and what is your response route?
Consultations are typically scheduled within 48 hours. For Holland Center, the route originates at the Holland Town Hall, proceeds via I-43, and results in a 25 to 35-minute travel time for an on-site structural and zoning assessment.
How does Holland's soil and termite risk affect fencing material choice?
The moderate soil corrosivity index and slight-to-moderate termite risk require material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks from degrading the fence's appearance and structure.
What are the height and setback rules for fences in Holland, WI?
Zoning limits are 4 feet tall in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, maintain a clear 'sight triangle' at intersections. Proximity to I-43 demands strict adherence to visibility rules to prevent traffic hazards.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic self-latching mechanisms can be configured to comply with the International Swimming Pool and Spa Code (ISPSC). This integration is a moderate trend in 2026, providing both access control and critical liability protection for Wisconsin homeowners with pools.
