Top Fencing Companies in Kimberly, WI, 54136 | Compare & Call
There are 24 fencing companies server in Kimberly WI
Matti's Restoration serves Appleton, WI, and the Fox Valley area with interior and exterior home improvement services. Founded on a commitment to craftsmanship and competitive pricing, the company spe...
Rc Fencing is a trusted fence and gate contractor serving Kaukauna, WI, and the surrounding Fox Valley area. Whether you live near the 1000 Islands Environmental Center or in the historical neighborho...
Phoenix Decking in Wrightstown, WI, brings over six years of experience to deck and fence projects throughout the area. We design and build custom decks that match your vision, from new construction t...
Family Contracting, based in Freedom, WI, is your local expert for fences, gates, decks, railing, and general contracting. We understand that in our area, frequent high winds and heavy snow loads can ...
Estimated Fencing Costs in Kimberly, WI
Frequently Asked Questions
Can I have a smart gate for my pool?
Yes, but it must integrate with IBC/IRC pool code. The gate must self-close and self-latch, with the release mechanism at least 54 inches high. Modern IoT latches can provide access logs and remote status alerts, meeting 2026 liability standards for Wisconsin homeowners.
Is a standard fence strong enough for our wind?
No. A 115 MPH V-ult wind load rating dictates engineering. Standard 8-foot post spacing often fails. We use 6-foot spacing with concrete footings and wind-rated brackets to withstand peak storm season gusts, per ASCE 7-22 standards.
What are my legal duties when replacing a shared fence in Kimberly?
Wisconsin Statute 90.03, the 'Good Neighbor' fence law, requires you to provide adjoining owners written notice before replacing a shared boundary fence. As of 2026, this notification must be sent via certified mail at least 15 days prior to starting work.
Why do fence posts in Kimberly Heights fail so often?
Posts fail because they are not set below the 48-inch frost line. Frost heave in our soil can lift a shallow footing by several inches each winter, cracking posts and racking panels. IRC Section R403 requires footings to extend below this depth to prevent structural movement.
What fence materials work best with Kimberly's soil?
With moderate soil corrosivity and slight termite risk, pressure-treated pine or vinyl are suitable. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Incompatible materials will degrade faster, increasing long-term maintenance costs.
How soon can you start a project in Kimberly Heights?
We can schedule a site consultation within 48 hours. Our standard route from Sunset Park uses I-41, providing a 15-20 minute response time to your neighborhood for the initial assessment and quote.
What are the height and placement rules for a fence in Kimberly?
Zoning limits are 4 feet high in front yards and 6 feet in rear yards. A 0-foot setback allows installation on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections, especially near I-41, where visibility for traffic is critical.
What is required before digging fence post holes?
You must contact Diggers Hotline (811) at least three business days before digging. Hitting a utility line in Kimberly Heights is a major liability. We manage all Diggers Hotline tickets and pull the required permit from the Kimberly Inspection Office to ensure compliance.
