Top Fencing Companies in Sherwood, WI, 54129 | Compare & Call

There are 17 fencing companies server in Sherwood WI

Fox Valley Overhead Door Company

Fox Valley Overhead Door Company

★★★☆☆ 3.4 / 5 (5)
N3021 Jeske Rd, Appleton WI 54913
Garage Door Services, Fences & Gates

Fox Valley Overhead Door Company Inc. has been serving Appleton, WI, and the surrounding areas since 1973. As a locally owned and operated business, we specialize in residential and commercial garage ...

Yard Elevations

Yard Elevations

Menasha WI 54952
Fences & Gates, Decks & Railing, Patio Coverings

Yard Elevations, based in Menasha, WI, specializes in building and restoring outdoor living spaces. With over five years of experience, we focus on decks, fences, gates, and patio covers. Our services...

Deck By Design

Deck By Design

Howard WI 54313
Decks & Railing, General Contractors, Fences & Gates

With over 30 years of experience, Decks by Design is a trusted name for deck construction, repair, replacement, and building additions in Howard, WI, and the greater Green Bay area. We specialize in c...

The Complete Carpenter

The Complete Carpenter

Oconto WI 54153
Fences & Gates, Door Sales/Installation

The Complete Carpenter, based in Oconto, WI, brings over 20 years of expertise in carpentry to both residential and commercial clients. Specializing in door installation, fences, gates, and outdoor st...

Matti's Restoration

Matti's Restoration

Appleton WI 54914
Flooring, Fences & Gates, Siding

Matti's Restoration serves Appleton, WI, and the Fox Valley area with interior and exterior home improvement services. Founded on a commitment to craftsmanship and competitive pricing, the company spe...

Rc Fencing

Rc Fencing

Kaukauna WI 54130
Fences & Gates

Rc Fencing is a trusted fence and gate contractor serving Kaukauna, WI, and the surrounding Fox Valley area. Whether you live near the 1000 Islands Environmental Center or in the historical neighborho...

Phoenix Decking

Phoenix Decking

Wrightstown WI 54180
Decks & Railing, Fences & Gates

Phoenix Decking in Wrightstown, WI, brings over six years of experience to deck and fence projects throughout the area. We design and build custom decks that match your vision, from new construction t...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Sherwood, WI

Emergency Fence/Gate RepairStorm / Security Response
$384 - $519
Wood Privacy Fence (Per LF)Estimated Range
$34 - $54
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $74
Chain Link Installation (Per LF)Estimated Range
$24 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$59 - $84
Standard Driveway Gate InstallEstimated Range
$1,384 - $1,854

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sherwood. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

Do smart gates meet Wisconsin's pool safety code?

Yes. IBC 2021 Appendix AG requires a 48-inch minimum barrier height with self-closing, self-latching gates. A properly integrated IoT smart gate with an automatic latch meets this standard. The low-to-moderate smart gate trend in 2026 focuses on combining access control with compliance, reducing liability for Wisconsin homeowners with pools.

Why is a 48-inch footing depth critical for my fence in Quarry Ridge?

Sherwood's 48-inch frost line depth requires footings below this level. Post footings set above this depth risk frost heave, where frozen soil lifts and cracks posts. The local soil saturation from seasonal freeze-thaw cycles makes this a primary failure point. We design footings to IRC standards, anchoring the structure below the frost line for permanent stability.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Wisconsin Statute 90.03, the 'good neighbor law,' mandates written notification to adjoining property owners before constructing or replacing a shared boundary fence in Sherwood. This 2026 requirement ensures shared cost and maintenance responsibility are established. Failure to provide notice can lead to disputes and liability for the full cost.

How do you design a fence to withstand 115 MPH winds in Sherwood?

The 115 MPH V-ult wind speed rating is the ultimate design wind speed. This engineering standard from ASCE 7-22 dictates post spacing, concrete footing mass, and bracket strength. Fences in open areas or near High Cliff State Park face higher exposure. We design for these peak storm season gusts, often using reinforced post anchors and reduced panel spans to prevent failure.

What is the utility locate process before digging fence post holes?

State law requires contacting Diggers Hotline (811) at least three business days before excavation. They mark public utility lines. Hitting an unmarked line in Quarry Ridge, such as fiber optic or gas, creates major liability for repair costs and service disruption. We manage this call and coordinate any necessary permits with the Sherwood permit office as part of the project scope.

How does Sherwood's soil and termite risk affect my fence material choice?

Sherwood's moderate soil corrosivity index and slight-to-moderate termite risk demand material compatibility. Pressure-treated wood must be rated for ground contact. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corrosion. Avoid untreated wood in direct soil contact and select termite-resistant materials like cedar or metal for long-term durability.

What is your dispatch and consultation timeline for a project in Sherwood?

Our standard dispatch for a site consultation is 3-5 business days. The route from our office near High Cliff State Park via WIS-114 to the Quarry Ridge neighborhood typically takes 25-35 minutes. We schedule the consultation to assess your site's specific wind exposure, zoning context, and footing requirements before providing a firm proposal and start date.

What are Sherwood's height and setback rules for a fence on my property?

Sherwood zoning limits fence height to 4 feet in front yards and 6 feet in rear yards. The setback regulation is 0 feet, allowing installation directly on the property line. For corner lots, a 'sight triangle' at intersections must remain clear for driver visibility. This is critical near WIS-114, where obstructions can create traffic hazards and code violations.



Scroll to Top
CALL US NOW