Top Fencing Companies in Yorkville, WI, 53126 | Compare & Call
There are 43 fencing companies server in Yorkville WI
Agood Construction, based in Milwaukee, WI, has been helping homeowners since 2014. Our team brings over 15 years of experience in deck construction, fence installation, kitchen remodeling, room addit...
Quality Fencing has been building and repairing fences in Kenosha since 1995. Founded by a single father of two young boys, the business grew from a desire to work with his hands and stay close to hom...
Yutka Fence has been a family-owned staple in Kenosha since 1968, when Paul Yutka turned his Air Force experience into a fence contracting business. Today, I run the company alongside my father and my...
Scorpion Stain serves Pewaukee and the Lake Country and Metro Milwaukee areas as a dedicated wood care contractor. We specialize in fence and deck construction, refinishing, and repair, and also handl...
S&S Fence Co. is a locally owned and operated fence company based in Kenosha, Wisconsin. Founded in 2015 by a Bradford High School graduate and Decker College alumnus with a degree in applied science ...
The Fence Master provides expert fence and gate services for residential, commercial, and agricultural properties throughout Milwaukee, WI. With years of experience, we specialize in designing, constr...
JCR Landscaping Services LLC, based in Racine, WI, has been improving outdoor spaces in southeastern Wisconsin for over 15 years. We handle the full scope of property care, from landscape design and l...
Clover Fence has been serving southeastern Wisconsin since 2014, bringing over 35 years of combined experience in the fencing industry. Founded by a local veteran fencer, the company specializes in de...
Racine Fence Contractor, founded by Samuel in 2002, has over two decades of experience serving Racine, WI. Samuel's hands-on approach ensures every project—from initial consultation to completion—meet...
Behl Fence & Decking is a family-owned and operated business serving southeastern Wisconsin, including Watertown, Johnson Creek, and Oconomowoc. Owner Philip, a military veteran, oversees every projec...
Estimated Fencing Costs in Yorkville, WI
Q&A
How is a fence engineered for high winds?
The design wind speed for Yorkville is 115 mph V-ult per ASCE 7-22 standards. This ultimate wind load dictates post spacing, concrete footing size, and bracket strength. A fence in an open area near I-94 requires closer post centers and reinforced corner posts to resist the higher wind exposure. Proper engineering for these loads prevents failure during peak storm season gusts.
What is required before digging fence post holes?
You must contact Diggers Hotline of Wisconsin (811) at least three business days before excavation. Hitting an unmarked utility line in the Yorkville Village Center can result in major service disruptions, fines, and liability for repair costs. Concurrently, secure any required permits from the Yorkville Town Hall. Managing this paperwork upfront prevents project delays and legal complications.
Do smart gates meet Wisconsin pool safety codes?
Yes, integrated IoT gate systems can be configured to meet IRC Appendix AG and Wisconsin SPS 326. The code requires self-closing, self-latching gates with the latch mechanism placed at a minimum height. A smart gate's automated latching and remote monitoring provide an audit trail, which strengthens liability protection for homeowners by demonstrating active compliance with access control standards.
What is the typical timeline for a consultation and project start?
A structural consultation can be scheduled within one week. The route from the Yorkville Town Hall via I-94 allows for a 35-45 minute response window to most properties in the area. Following the consultation, material procurement and permit approval typically set a project start date 2-3 weeks out, depending on the complexity of the wind and footing design.
How deep do fence posts need to be in Yorkville?
Posts must be set a minimum of 48 inches deep, below the local frost line. IRC Section R403.1.4 requires this depth to prevent frost heave, which is a leading cause of post failure and structural racking in the Yorkville Village Center. Shallow footings will heave during freeze-thaw cycles, compromising the fence's alignment and stability.
What are Yorkville's height and placement rules for fences?
Zoning limits are 4 feet in front yards and 6 feet in rear yards. A zero-foot setback is allowed on side and rear property lines. For corner lots, especially those near I-94, you must maintain a clear 'sight triangle' at intersections. This is a safety zone where no visual obstruction over 3 feet high is permitted, as defined by local ordinance to ensure driver visibility.
Which fence materials perform best in Yorkville's soil?
Yorkville has moderate soil corrosivity and a slight to moderate termite risk. Pressure-treated pine rated for ground contact is standard. Use hot-dip galvanized or stainless steel fasteners to prevent rust streaks from corrosion. For vinyl or composite fences, ensure posts are properly sleeved to prevent moisture wicking. Material compatibility with the local soil pH is critical for long-term durability.
What are the legal steps before building a fence on my property line?
Wisconsin Statute 90.03, the 'Good Neighbor Fence Law,' governs shared boundaries. As of 2026, you must provide written notice to all adjoining landowners in Yorkville before replacing or building a partition fence on the property line. This formal notice is a prerequisite, and failure to provide it can affect cost-sharing and legal standing. A zero-foot setback is permitted, but the statute defines the notification process.
