Top Fencing Companies in Enterprise, AL, 36330 | Compare & Call
There are 28 fencing companies server in Enterprise AL
Adams’ Family Fencing has been serving Elba, AL, and the surrounding areas with reliable fence and gate solutions. Located near downtown Elba and the Pea River, the company understands the unique chal...
Southern Blend Property Solutions
Southern Blend Property Solutions, based in Daleville, AL, has been serving the Wiregrass and Southern Panhandle areas since 2021. As a licensed home services provider, they specialize in custom seaml...
Southern Barn Construction has served Rehobeth, AL, and the surrounding Wiregrass region for over five years, specializing in pole barns, metal buildings, decks, fences, gates, and remodeling. As a li...
Dog Guard of Dothan has been serving Dothan, AL homeowners for years, specializing in fence and gate repair and pet containment solutions. We understand the local challenges: high winds during storm s...
Sugar Cove Metal Works, based in Andalusia, AL, specializes in metal fabrication, fencing and gates, and trailer repair. The company provides custom metal staircases, handrails, fences, and gates, cra...
Strickland Fence Company, serving Taylor, AL, specializes in residential and commercial fences and gates. Located near the intersection of Highway 84 and County Road 9, the company addresses common lo...
A&M Clearing serves Newville, AL, and the surrounding areas with reliable tree services, excavation, and fencing expertise. Many local homes face fencing issues like gate sagging from worn hinges or t...
American Imperial Fence has served Ozark, AL, and the surrounding areas as a licensed and insured fence and gate contractor since 1998. The company provides a full spectrum of fencing solutions, inclu...
Escalante's Home Repairs & Construction
Escalante's Home Repairs & Construction is a trusted handyman and general contractor serving Daleville, AL, and the surrounding areas. Specializing in fences and gates, the team understands the local ...
Ezduzit Welding, based in Midland City, AL, brings over 15 years of hands-on experience in industrial and commercial welding to local homes and businesses. Founded in 2025 after a decade-long tenure w...
Estimated Fencing Costs in Enterprise, AL
FAQs
Is a standard fence design strong enough for Enterprise winds?
No. The 115 MPH V-ult wind speed rating requires engineering for ultimate loads. Standard 8-foot post spacing often fails. Design must follow ASCE 7-22 standards, using closer post spacing (6 feet or less) and certified wind-rated brackets to resist peak storm season gusts, especially in exposed areas.
Why do fence posts in Downtown Enterprise need deep concrete footings?
The 6-inch frost line in Enterprise requires posts set below it. Frost heave from soil expansion can lift shallow posts, causing structural failure. IRC 2021 Section R403.1.4 mandates footings below the frost line. Posts not set to this depth in your neighborhood will tilt or fail within two winters.
What are the legal steps for replacing a shared fence in Enterprise?
Alabama Code Section 35-3-1, the Partition Fence law, governs shared boundaries. For a 2026 installation, you must provide formal written notice to adjoining landowners before altering a shared boundary line. This is a strict legal prerequisite in Enterprise; proceeding without it can result in liability for the full cost of the fence.
What are the height and setback rules for an Enterprise fence?
Enterprise zoning limits are 4 feet in front yards and 8 feet in rear yards. A 0-foot (on-line) setback is allowed with written neighbor consent. For corner lots, maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high within 25 feet of the corner. This is critical for visibility near high-traffic corridors like US-84.
What is the typical timeline and route for a consultation?
We schedule consultations within 48 hours. For Downtown Enterprise, our route originates near the Enterprise Dogwood Trail, proceeds via US-84, and typically results in a 15 to 20-minute on-site arrival. This allows for a same-day site assessment and preliminary quote under standard conditions.
What is required before digging fence post holes?
You must contact Alabama 811 for a utility locate at least three working days before excavation. Hitting a buried line in Downtown Enterprise incurs major repair costs and liability. The service marks public lines; private lines require a private locate. We manage all associated city permit office paperwork for the installation.
How does Enterprise's environment affect fence material choice?
Very Heavy termite risk and Moderate soil corrosivity dictate material compatibility. Pressure-treated Southern Yellow Pine or concrete posts are mandatory for wood structures. Use only hot-dip galvanized or stainless-steel fasteners; standard hardware will rust, causing unsightly streaks and premature failure in this soil.
Can a smart gate meet Alabama pool safety and security needs?
Yes. A smart gate with an integrated, self-closing and self-latching IoT mechanism can comply with IRC Appendix AG (54-inch height, inward swing) for pools. The system logs access and provides remote status alerts, meeting modern liability standards for Alabama homeowners by combining physical code compliance with digital audit trails.
