Top Fencing Companies in Enterprise, AL, 36330 | Compare & Call
There are 28 fencing companies server in Enterprise AL
C&S Fencing is a family-owned business serving Enterprise, Alabama, and surrounding areas from its Mississippi roots. Owners CJ and Shannon Keyes bring years of experience in fence and gate installati...
LLG Carpentry, based in Enterprise, AL, is a licensed custom carpentry company with over 15 years of experience in home improvement. We specialize in a range of services including interior renovations...
Southern Backyard Solutions serves Chancellor, AL, specializing in fences and gates. They frequently address common local issues like damaged privacy fence panels and gate locking mechanism failures. ...
ASAP Contractors serves homeowners in Enterprise, AL, with a focus on building additions, deck construction and repair, and fencing solutions. Located near the Enterprise State Community College and t...
Serving Enterprise, AL, P6 Property Solutions offers reliable excavation, tree services, and trench digging for local homeowners. Whether you're dealing with storm-damaged fence panels, humidity-induc...
Moss Construction is a locally owned and operated contractor based in New Brockton, Alabama, specializing in custom decks, fences, gates, porches, pole barns, party barns, and lean-tos. Serving southe...
Jack Of All Trades in Enterprise, AL, specializes in masonry, concrete, fences, gates, and carpentry. Located near the Boll Weevil Monument and along Boll Weevil Circle, the business addresses common ...
On Call Landscaping and Excavation
On Call Landscaping and Excavation serves New Brockton, AL, and the surrounding areas, offering expert excavation, trench digging, and landscaping services. Located just off Highway 84 near the New Br...
Estimated Fencing Costs in Enterprise, AL
FAQs
Is a standard fence design strong enough for Enterprise winds?
No. The 115 MPH V-ult wind speed rating requires engineering for ultimate loads. Standard 8-foot post spacing often fails. Design must follow ASCE 7-22 standards, using closer post spacing (6 feet or less) and certified wind-rated brackets to resist peak storm season gusts, especially in exposed areas.
Why do fence posts in Downtown Enterprise need deep concrete footings?
The 6-inch frost line in Enterprise requires posts set below it. Frost heave from soil expansion can lift shallow posts, causing structural failure. IRC 2021 Section R403.1.4 mandates footings below the frost line. Posts not set to this depth in your neighborhood will tilt or fail within two winters.
What are the legal steps for replacing a shared fence in Enterprise?
Alabama Code Section 35-3-1, the Partition Fence law, governs shared boundaries. For a 2026 installation, you must provide formal written notice to adjoining landowners before altering a shared boundary line. This is a strict legal prerequisite in Enterprise; proceeding without it can result in liability for the full cost of the fence.
What are the height and setback rules for an Enterprise fence?
Enterprise zoning limits are 4 feet in front yards and 8 feet in rear yards. A 0-foot (on-line) setback is allowed with written neighbor consent. For corner lots, maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high within 25 feet of the corner. This is critical for visibility near high-traffic corridors like US-84.
What is the typical timeline and route for a consultation?
We schedule consultations within 48 hours. For Downtown Enterprise, our route originates near the Enterprise Dogwood Trail, proceeds via US-84, and typically results in a 15 to 20-minute on-site arrival. This allows for a same-day site assessment and preliminary quote under standard conditions.
What is required before digging fence post holes?
You must contact Alabama 811 for a utility locate at least three working days before excavation. Hitting a buried line in Downtown Enterprise incurs major repair costs and liability. The service marks public lines; private lines require a private locate. We manage all associated city permit office paperwork for the installation.
How does Enterprise's environment affect fence material choice?
Very Heavy termite risk and Moderate soil corrosivity dictate material compatibility. Pressure-treated Southern Yellow Pine or concrete posts are mandatory for wood structures. Use only hot-dip galvanized or stainless-steel fasteners; standard hardware will rust, causing unsightly streaks and premature failure in this soil.
Can a smart gate meet Alabama pool safety and security needs?
Yes. A smart gate with an integrated, self-closing and self-latching IoT mechanism can comply with IRC Appendix AG (54-inch height, inward swing) for pools. The system logs access and provides remote status alerts, meeting modern liability standards for Alabama homeowners by combining physical code compliance with digital audit trails.
