Top Fencing Companies in Fresno, CA, 93611 | Compare & Call
There are 236 fencing companies server in Fresno CA
Rovall Welding & Fabrication
Rovall Welding & Fabrication, established in 2019 by Ryan Rovenstine and Troy Allred, brings over 30 years of combined experience to Paso Robles. As a licensed specialty sub-contractor holding both a ...
Dee Guys Fencing and Automatic Gate Openers is a small, family-owned business serving Fresno, CA. We specialize in fence and gate installation, repair, painting, staining, and weatherproofing, as well...
Kings Construction in Fresno, CA specializes in fences & gates, landscaping, and masonry/concrete. We address common local issues like fence staining deterioration caused by Fresno's intense sun and h...
Central Valley Fencing Contractors has served Fresno, CA, for over 14 years, providing fencing solutions for residential, commercial, industrial, and agricultural properties. With experience working a...
For over 25 years, California Commercial Fence has been a trusted provider of fence and gate solutions in Clovis, CA. Our team handles installations, repairs, weatherproofing, and custom gate projects...
Left Coast Weld
Left Coast Weld Co, based in Fresno, CA, provides a full range of metal fabrication services for residential, commercial, and industrial clients. Specializing in custom fences and gates, we handle eve...
Ygf is a trusted provider of fence and gate services in Fresno, CA, addressing common local issues like sagging gates and fence expansion damage caused by the region's heat and soil shifts. Located ne...
Coons' Fences is a Clovis, CA-based fence and gate company serving residential and commercial clients. We specialize in installing, repairing, painting, staining, and weatherproofing fences made from ...
Kelly's Fencing provides comprehensive fence and gate services in Fresno, CA, including installation, repair, painting, staining, and weatherproofing. Local homeowners near Tower District, Fig Garden,...
Spence Fence, a licensed C13 contractor based in Visalia since 1977, specializes in custom fencing and gate solutions for residential, commercial, and industrial properties. Serving neighborhoods near...
Estimated Fencing Costs in Fresno, CA
Frequently Asked Questions
What are the requirements for a pool fence with a smart gate?
Pool barriers must meet ASTM F1908-16 and CA Health & Safety Code 115922, specifying self-closing, self-latching gates with latches 54 inches above grade. Modern IoT-integrated smart gates can meet this standard with certified magnetic locks and automatic closure sensors. This integration provides access logs, which are becoming a standard liability defense for California homeowners.
How deep should fence posts be set in Fresno?
Posts require a minimum 12-inch footing below the finish grade, set below the local 12-inch frost line to prevent frost heave. In the Tower District's expansive clay soils, posts set shallower than 24 inches often tilt or fail within two seasons. The IRC mandates footings below the frost line; we pour concrete footings to 30 inches for critical stability.
What are the height and setback rules for fences in Fresno?
Fresno zoning limits front yard fences to 3 feet and rear yard fences to 7 feet. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near high-traffic corridors like CA-41, a 15-foot visibility 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet tall.
What fence materials work best in Fresno's soil?
Fresno's moderate soil corrosivity index and moderate termite risk demand material compatibility. Pressure-treated pine or cedar is standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. In designated historic zones near the Tower Theatre, material usage is restricted—often requiring wood replicas instead of vinyl or composite.
Is my fence designed for Fresno's wind?
Fences in Fresno are engineered for a V-ult wind speed of 95 mph per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For open exposures near CA-41, we reduce standard 8-foot panel spans to 6 feet and use through-bolt connections to survive peak storm season gusts without racking or failure.
How soon can you start a fencing project in the Tower District?
We typically schedule a site consultation within 48-72 hours of inquiry. Our standard route from the Tower Theatre landmark uses CA-41 for direct access, resulting in a 25-35 minute dispatch window for most Tower District addresses. Project start dates are set after utility locates are clear and the City permit is issued.
What is required before digging fence post holes?
State law requires contacting Underground Service Alert of Northern California at 811 at least two working days before any excavation. In the Tower District, hitting a gas, fiber, or irrigation line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate all required City of Fresno permit office paperwork prior to mobilization.
Do I need to notify my neighbor before building a fence in Fresno?
Yes. For any fence on a shared boundary, California Civil Code 841 requires formal written notice to adjoining landowners at least 30 days prior to construction. As of 2026, this notification must include a project description and proposed cost-sharing details. Failure to provide this notice is a legal defect and can halt the project.