Top Fencing Companies in Fresno, CA, 93611 | Compare & Call
There are 236 fencing companies server in Fresno CA
Orozco Fencing is a trusted local fencing contractor serving Fresno, CA, and the surrounding areas. With years of experience, they specialize in fence repair, installation, and staining. Many Fresno h...
Gratitude Construction
Gratitude Construction is a licensed and bonded general contractor serving Fresno and Clovis, CA. We specialize in helping homeowners enjoy their property more through room additions, kitchen and bath...
Automated Access
Automated Access Inc. has been Fresno's trusted source for custom gate systems since 1989. We design, fabricate, and install every gate ourselves—100% of the work shown in our photos is our own. Our s...
The Fencing Guys & Automatic Gate Opener is a trusted local provider serving Fresno, CA, and the surrounding areas, including neighborhoods near Fig Garden Village and the Fresno Chaffee Zoo. With ove...
Armandos Fence has been serving Fresno, CA, and surrounding areas with expert fence and gate solutions. Located near the Tower District and just a short drive from Fresno State, we understand the uniq...
A Rodriguez Fence has been serving Clovis, CA, for over a decade, specializing in repairing and replacing fences damaged by wildfire exposure and rusting metal components. Located near Sierra Vista Ma...
Santos Garage and Gate Repair provides expert fence, gate, and garage door services throughout Fresno, CA. With years of hands-on experience, Santos handles everything from broken gate operators and l...
Mora Fencing is a trusted provider of fence and gate services in Bishop, CA, serving homeowners and businesses near landmarks like the Bishop City Park and along Main Street. Specializing in fence and...
Wildwood Fence, based in Kerman, CA, has been providing professional fence and gate services for 35 years, with 25 years of licensed experience. Formerly known as JMC Fence, the company focuses on woo...
Communion Concrete serves Fresno, CA, specializing in masonry, concrete, fences, gates, and artificial turf. Local homeowners frequently face fence panel cracking and sagging gates due to heat and soi...
Estimated Fencing Costs in Fresno, CA
Frequently Asked Questions
What are the requirements for a pool fence with a smart gate?
Pool barriers must meet ASTM F1908-16 and CA Health & Safety Code 115922, specifying self-closing, self-latching gates with latches 54 inches above grade. Modern IoT-integrated smart gates can meet this standard with certified magnetic locks and automatic closure sensors. This integration provides access logs, which are becoming a standard liability defense for California homeowners.
How deep should fence posts be set in Fresno?
Posts require a minimum 12-inch footing below the finish grade, set below the local 12-inch frost line to prevent frost heave. In the Tower District's expansive clay soils, posts set shallower than 24 inches often tilt or fail within two seasons. The IRC mandates footings below the frost line; we pour concrete footings to 30 inches for critical stability.
What are the height and setback rules for fences in Fresno?
Fresno zoning limits front yard fences to 3 feet and rear yard fences to 7 feet. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near high-traffic corridors like CA-41, a 15-foot visibility 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet tall.
What fence materials work best in Fresno's soil?
Fresno's moderate soil corrosivity index and moderate termite risk demand material compatibility. Pressure-treated pine or cedar is standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. In designated historic zones near the Tower Theatre, material usage is restricted—often requiring wood replicas instead of vinyl or composite.
Is my fence designed for Fresno's wind?
Fences in Fresno are engineered for a V-ult wind speed of 95 mph per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For open exposures near CA-41, we reduce standard 8-foot panel spans to 6 feet and use through-bolt connections to survive peak storm season gusts without racking or failure.
How soon can you start a fencing project in the Tower District?
We typically schedule a site consultation within 48-72 hours of inquiry. Our standard route from the Tower Theatre landmark uses CA-41 for direct access, resulting in a 25-35 minute dispatch window for most Tower District addresses. Project start dates are set after utility locates are clear and the City permit is issued.
What is required before digging fence post holes?
State law requires contacting Underground Service Alert of Northern California at 811 at least two working days before any excavation. In the Tower District, hitting a gas, fiber, or irrigation line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate all required City of Fresno permit office paperwork prior to mobilization.
Do I need to notify my neighbor before building a fence in Fresno?
Yes. For any fence on a shared boundary, California Civil Code 841 requires formal written notice to adjoining landowners at least 30 days prior to construction. As of 2026, this notification must include a project description and proposed cost-sharing details. Failure to provide this notice is a legal defect and can halt the project.