Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
AM Welding, based in Long Beach, California, brings over 10 years of experience in custom metal fabrication, structural welding, and pipeline work using SMAW, GTAW, FCAW, and GMAW techniques. As a Cal...
The Luxury Contractor Painting, led by Jose ""Rodrigo"" Dominguez, has been serving Long Beach and surrounding areas since 2001 with over 22 years of experience. As a licensed (C-33) and insured contr...
Estradas Iron Works has been serving Long Beach, CA, since 2006 as a family-owned metal fabrication and fencing company. We specialize in custom fences, gates, railings, and security doors, along with...
A G Solution is a Long Beach, CA based contractor specializing in fences, gates, demolition, and drywall services. We understand that your property needs to be both secure and well-maintained. From in...
AM PM Local Gate Services is a family-owned business based in Pasadena, CA, with over 21 years of experience in fence, gate, and garage door services. Founded by Havier, the company prioritizes trust,...
Figueroa Landscaping, based in Carson, CA, is a family-run business rooted in a tradition of hard work and dedication. Owner Alex Figueroa learned the trade from his father, spending summers mowing la...
Long Beach Welding, established in 2018, is a licensed and fully insured metal fabrication company serving Long Beach and all of Southern California. We specialize in MIG, stick, and flux welding, off...
CG IRONWORKS is a Torrance-based metal fabrication company owned and operated by Richard, an LA City Certified welder with nearly 20 years of experience. After honing his craft at a small shop in Gard...
No Limit Fence has served Huntington Beach and surrounding areas for over 35 years as a family-owned, licensed, insured, and bonded C13 fence contractor. Specializing in residential, commercial, and a...
Casa Grande Landscaping serves Compton, CA, specializing in landscaping, fences and gates, and artificial turf. We tackle common local issues like fence expansion damage from heat and soil shifts, plu...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
