Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Since 1984, Affordable Fencing Company has been installing durable fences, gates, patio covers, arbors, and gazebos for homeowners, HOAs, and commercial clients in Corona and throughout Southern Calif...
Wood Fence Expert in Los Angeles, CA has been building wood fences and gates since 2008, but owner's experience dates back to the 1980s. After a detour into a different career, he left a sales job he ...
Mex Iron Artwork is a custom ironwork business founded by Gustavo, known as Gus, in 1998. Starting in Venice, California, the company originally focused on handcrafted wrought iron furniture before mo...
Hammerhead Woodworking is a carpentry business based in Long Beach, CA, specializing exclusively in fences, gates, decks, and pergolas. Unlike general carpenters, owner-operator focuses solely on thes...
Irvine Fence Inc., established in 2010, is a licensed fencing contractor serving Anaheim, CA. What began with a single truck and a commitment to affordable, reliable vinyl fencing has grown into a ful...
Mike's Synthetic Grass in Long Beach, CA, specializes in transforming outdoor spaces with synthetic grass for both residential and commercial properties. Beyond turf installation, the company offers a...
Founded in 2013 by Chad Mugavero, a Long Beach State graduate and lifelong resident, C & N Fence & Masonry is a local, hands-on company serving the Long Beach area. We specialize in fencing, gates, an...
20th Century Wrought Iron
20th Century Wrought Iron, a family-owned business in Garden Grove, CA, has been crafting custom steel products since 1975. Founded by Clint's father, the company now carries on his legacy under Clint...
Gold Coast Fence, based in Long Beach, CA, is a family-owned fence contracting business founded in 2010 by Scott and his son Chris. With Scott’s 45 years of experience and Chris’s 13 years in the fenc...
Gomez Landscaping is a family-owned business serving Wilmington, CA, and the South Bay area since 2009. We focus on residential and commercial outdoor projects, from new landscape design and installat...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
