Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Finest Fence Company
Finest Fence Company has been serving Simi Valley, CA since 1992, providing custom fencing, gates, decks, and patio coverings for both residential and commercial clients. As a licensed and bonded cont...
Katchakid has been safeguarding children in Torrance and beyond for over 40 years. We specialize in childproofing solutions, including pool safety barriers that comply with ASTM F1346-91 standards. Ou...
Nick Garage Door is a family-owned business serving West Hills, CA, specializing in garage door and fence/gate repair. We provide same-day service for damaged doors, stuck openers, cable issues, and c...
TA Gates Technology & Access is a family-owned business based in San Fernando Valley, CA, specializing in fences and gates. Owner Avigayil brings years of hands-on experience from working with establi...
Hill's Contracting
Hill’s Contracting, a licensed home services contractor established in 2013, serves Panorama City and the surrounding San Fernando Valley. Accredited by the Better Business Bureau, the company special...
Mpi Fence is a family-owned and operated licensed fence company serving Murrieta, CA, and the surrounding areas. Our owner was born and raised in Riverside County and began working with his father, a ...
High Desert Affordable Fencing has been serving Hesperia and the broader High Desert area as a licensed fencing and stucco contractor. We handle everything from new fence and gate installations to rep...
GLM Fence & More in Compton, CA, has been serving the community since 2010 with expert fence and gate services. Owner completed a two-year Construction program at Los Angeles Trade Technical College (...
B&C Custom Fencing serves Buena Park homeowners and businesses with durable, custom fences, gates, and handrails. We specialize in installations, repairs, and weatherproofing using vinyl, wood, chain ...
Montes Ornamental Iron Works is a family-owned business in Chino Hills, CA, serving the community since 2001. With over 25 years of experience, we specialize in hand-crafted custom iron work for fence...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
