Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
A and R Pallets, based in Gardena, CA, serves the community by addressing common fencing and gate issues many homeowners face. Whether it's fence post movement due to soil shifts or persistent gate lo...
Castles Customs, based in El Segundo, CA, brings over 15 years of experience to the metal fabrication industry, specializing in custom handrails and fencing for both residential and commercial propert...
E & M Tree Service has been a family-owned and operated business in Gardena, California, since 1998. We are licensed (License #1118103) and bonded, offering comprehensive tree services, landscaping, f...
Spence Fence and Gates is a local fencing company serving Hawthorne, CA, specializing in solving common issues like privacy fence panel damage and gate lock failures. Hawthorne's coastal climate—near ...
MCD Iron Works is a trusted provider of metal fabrication, fences & gates, and door sales/installation serving Lynwood, CA, and surrounding areas. Local homeowners often face common fencing challenges...
Serving East Los Angeles and surrounding areas, HawkLink Fences specializes in fence and gate installation, repair, and custom fabrication. We work with cable railing, iron, chain-link, aluminum, and ...
Himco Fence Gates and Security Products
Himco Fence Gates and Security Products has been a trusted name in Los Angeles for over 45 years, completing more than 150,000 service projects. Born and raised in Southern California, we specialize i...
SO Fence has been serving Los Angeles homeowners for over a decade, specializing in fence and gate installation, repair, painting, and weatherproofing. Local residents often face fence discoloration f...
Pacific Iron Works is a family-owned business in Los Angeles, CA, with over 30 years of experience in ornamental iron fabrication and installation. Our team of skilled craftsmen and installers special...
Gudino's Landscape
Gudino's Landscape transforms outdoor spaces in Los Angeles, CA, with a team experienced in general maintenance, tree trimming, and garden landscaping. We specialize in tree services—including plantin...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
