Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Marron Iron Works has been serving Los Angeles homeowners for over 20 years, specializing in door sales/installation, fences, and gates. Located near the Silver Lake and Echo Park neighborhoods, they ...
V&C Steel Supplies
V&C Steel Supplies, a family-owned business established in 2017, brings over a decade of metal industry experience to Compton, CA. Owner Victor is known for his friendly, hands-on approach, while mana...
Crown Welding is a family-run startup in Compton, CA, founded by a couple committed to honest pricing and quality craftsmanship. We specialize in fences, gates, doors, roof racks, bumpers, awnings, an...
Modern Iron Works, established in 1980, is a Los Angeles fence contractor specializing in wrought iron fences, gates, and railings. As a stair and railing contractor, they offer tailored solutions for...
BlueWave Fences, founded by Arran Frye, brings over 20 years of hands-on experience to Gardena homeowners. Frye started building fences with his father after school and turned that passion into a full...
Alco Services-South Bay Security Gates serves Gardena, CA, providing expert fence and gate solutions. Located near the Gardena Civic Center and the 110 Freeway, they address common local issues like r...
Montano's Iron Works has been serving Gardena, CA and the Southern California area with expert installation, fabrication, and repair of wrought iron and rod iron fences, gates, security bars, and hand...
M & F Home Improvements is a father-and-son team based in Gardena, CA, with over 35 years of experience in the home repairs trade. Specializing in flooring, fences and gates, and general contracting, ...
Ruben's Fencing serves the Hawthorne, CA, area with expert fence and gate services. We understand local challenges like frequent gate lock failures due to coastal corrosion and UV damage that can warp...
Gardena Iron Doors, located in Gardena, CA, specializes in custom iron fences and gates, providing durable solutions for local homeowners. Many residents in neighborhoods like Hollypark or near the Ga...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
