Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Southbay Fencing Contractor serves Gardena, CA, with expert fence and gate services ranging from installation and repair to painting, staining, and weatherproofing. We use only pressure-treated timber...
Marina Security Gate & Electronics
Marina Security Gate & Electronics has been family-owned and operated since 1950, serving Los Angeles and Orange County from its base in Gardena, CA. With over 60 years of experience, the company spec...
JV Ornamental Iron Work is a family-owned metal fabrication and fence company serving Gardena, CA, and the South Bay area. Located near the 405 freeway and just minutes from the Gardena Civic Center, ...
Cruz Electric Driveway Gate Repairs provides expert fence and gate services to Gardena, CA, and the surrounding South Bay area. We understand the specific challenges of our coastal climate, such as ru...
Bills Fencing in Gardena, CA specializes in deck and siding services, including construction, repair, and replacement. Gardena's coastal moisture and soil conditions often cause rusting metal componen...
A & R Company in Gardena, CA, specializes in expert fence and gate services, addressing common local issues like gate misalignment and fence panel cracking. Located near the Gardena Civic Center and j...
For over 63 years, Safeguard Steelmaster Erector Industries has been a family-owned business serving Gardena and the surrounding South Bay communities. We specialize in fences and gates, offering expe...
Primo Painting & Dry Wall Repair
At Primo Painting & Dry Wall Repair in Gardena, CA, we specialize in painting, drywall installation and repair, and related home services. For local homeowners, we address common fencing problems like...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
