Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
CBJ Studio is a Los Angeles-based contracting company specializing in painting, refinishing, and fence and gate services. Serving neighborhoods from Silver Lake to Sherman Oaks, the team handles every...
Legacy Iron Works Fence and Gates serves Riverside, CA, with specialized wrought iron, vinyl, and wood fence installation. The company treats every project with the dedication, care, and precision it ...
HK Project Engineering in Montrose, CA, specializes in custom metal fabrication for fences, gates, decks, and railings. Every project is designed and built by hand, ensuring each piece fits your speci...
Sanchez General Fencing, based in Torrance, CA, provides a full range of fence and gate services, specializing in Trex composite fencing, custom rolling gates, and gates. They also install vinyl, wood...
Reyes Fencing in Los Angeles, CA, specializes in residential and commercial fences and gates. Many homeowners face issues with fence staining deterioration and discoloration due to the region’s intens...
G Squad Fencing, based in Compton, CA, brings over 20 years of metal fabrication and construction experience to every job. As a licensed contractor, we specialize in the design, installation, and repa...
Vanguard Iron Works & Welding
Vanguard Iron Works & Welding is a metal fabrication company serving Azusa, CA, and the surrounding San Gabriel Valley. Specializing in custom-designed gates, fences, railings, and staircases, they of...
King Fence, Inc has been serving Inglewood and the surrounding Los Angeles area as a licensed fencing contractor. We specialize in fence and gate installation, repair, painting, staining, and weatherp...
Self Made Fence Company, Inc., based in the San Fernando Valley, is a licensed residential and commercial fence contractor serving all of California. Founded in 2023, we specialize in custom fence ins...
Capo Carpentry has been serving Redondo Beach homeowners with custom carpentry solutions for fences, decks, gates, and more. Based near the Redondo Beach Pier, we understand the unique challenges of c...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
