Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Jimenez Welding, serving Lynwood, CA, brings over a decade of experience in custom metalwork and fabrication. The business specializes in designing and installing residential fencing, sliding gates, m...
Ferrara Metal Works, based in San Pedro, CA, specializes in custom metal fabrication, fencing, and gate solutions for residential and commercial properties. As an LA City Certified Welder, the company...
J & J Fence and Construction has been a family-owned fencing contractor serving Compton and Los Angeles County since 1978. Fully licensed, bonded, and insured, we specialize in chain link, wrought iro...
Republic Fence in Chatsworth, CA has been a trusted name in fencing and gate contracting since 1951. We specialize in the installation, repair, and maintenance of a wide range of fencing materials, in...
Metro GDS Garage Door and Gate Services, founded by Ayal Mustakis in 2010, is a licensed and bonded provider serving Los Angeles homeowners and businesses. With over 12 years of hands-on experience, w...
Valley Tree Decking is a general contractor based in Los Angeles, specializing in decks, fences, railings, and pergolas. They use only the highest quality materials—hardwood, aluminum, vinyl, and stee...
Teak Guy is a specialized refinishing service based in Lynwood, CA, focusing on teak furniture, decks, fences, and outdoor fixtures. With years of hands-on experience, we understand how Southern Calif...
Founded in 1994 by Jose Guardado, GO Iron Works in Carson, CA, brings over 20 years of experience to custom metalwork. Born in Los Mochis, Sinaloa, Mexico, Jose learned welding as an apprentice in Ari...
Pacific Vinyl Fences
Pacific Vinyl Fences, based in Glendale, CA, is a licensed provider specializing in vinyl fences, gates, decks, and patio covers. Their products, all backed by a limited lifetime warranty, include dur...
Vinyl Land Fencing, a family-owned business established in 2000, serves Baldwin Park and the greater Los Angeles area with high-quality vinyl fencing, gates, decks, and patio covers. We use materials ...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
