Top Fencing Companies in Hillsborough, CA, 94010 | Compare & Call
There are 238 fencing companies server in Hillsborough CA
GC Welding Services, located in Sacramento, CA, is a family-owned mobile welding company with over 12 years of experience. Founded by a certified welder with an Associate’s degree in Welding Technolog...
Ergeon, based in Palo Alto, CA, is an outdoor construction company specializing in fence and gate installation. Founded by two CS PhD serial entrepreneurs, our mission is to empower homeowners to buil...
ABC Steel Fence, based in San Jose, CA, is your local expert for fence and gate solutions. With over 10 years of experience, we specialize in custom steel fence design, installation, repair, and maint...
With Fencing serves Brisbane, CA, a community where fences often face issues like leaning and expansion damage due to the area's coastal climate and soil shifts. Located near the Brisbane Lagoon and t...
Silvestre & Son's Fencing is a family-owned fencing contractor serving San Jose and the surrounding areas. Founded in 2014, the company is built on over 26 years of combined experience, with owner Sil...
ATR Welding
ATR Welding, Inc., founded by Lee Viloria in Hayward, CA in 2013, is a certified welding and fabrication shop serving local homeowners and businesses. With years of experience as a Lead Welder and Ins...
FencePro has been serving Brisbane, CA, since 1980 as a licensed fence and deck contractor. We hold both a C13 fence contractor license and a B general contractor license, ensuring every project meets...
Rolling Gates provides gate and fence solutions for residential and commercial properties in Walnut Creek, CA. With over a decade of experience, the company specializes in custom iron gate design, fab...
Durham Fence Company has been serving Millbrae, CA, and the entire Bay Area since 1981, bringing over three decades of expertise in fence and gate installation, repair, and weatherproofing, as well as...
Fusion Pro Gardening Inc. provides landscaping, hardscaping, concrete work, fences, and gates in South San Francisco. We focus on quality, clear communication, and dependable service. Our team treats ...
Estimated Fencing Costs in Hillsborough, CA
Questions and Answers
How deep should fence posts be set in Hillsborough to prevent frost heave?
Posts in the Carolands must be set a minimum of 12 inches into concrete footings that extend below the local frost line. IRC Section R403.1.4 requires this to prevent frost heave, which lifts and cracks posts. In moderate corrosivity soils, footings require a 6-inch gravel base for drainage and hot-dip galvanized post bases to meet IRC durability standards.
What are the neighbor notification laws for a new fence in California?
California Civil Code 841 mandates written notice to adjoining owners at least 30 days before constructing or replacing a shared partition fence. The 2026 amendment requires this notice to include material specifications and a proposed cost share. In Hillsborough, failure to provide this notice can result in a civil penalty and removal orders from the Town Hall.
What is the consultation timeline and route to a home in the Carolands?
A site consultation is scheduled within 48 hours of permit approval. The standard route from the Hillsborough Town Hall uses I-280 for access, with a typical 35-45 minute dispatch window. We confirm the arrival time via a tracking link sent the morning of the consultation, which includes the project lead's credentials and a digital copy of the site plan.
How is a fence engineered for Hillsborough's 110 MPH wind loads?
The V-ult wind speed of 110 MPH, per ASCE 7-22, dictates the structural design. This requires 4x4 posts at 6-foot centers maximum, set in 12-inch diameter concrete footings. All rail-to-post connections must use 1/2-inch galvanized through-bolts, not lag screws, to resist the uplift forces from peak storm season gusts common near I-280.
What are the height and setback rules for fencing in Hillsborough?
Zoning limits are 3 feet in front yards and 6 feet in rear yards. The 0-foot setback allows installation on the property line, but corner lots must maintain a clear 'sight triangle' at intersections. Fences within 10 feet of a driveway apron near I-280 must not exceed 36 inches in height to preserve driver visibility, as per Hillsborough Municipal Code Chapter 17.
What fencing materials resist termites and soil corrosion in Hillsborough?
Use stainless steel fasteners and hardware with pressure-treated wood rated for ground contact. For moderate termite risk, composite or aluminum panels are superior to cedar. All metal components in moderate corrosivity soils must be hot-dip galvanized (ASTM A123) to prevent rust streaks that stain foundations and violate Hillsborough's design review standards.
What is required before digging fence post holes?
State law requires a utility locate request through Underground Service Alert (811) at least two working days before excavation. Hitting a gas or fiber line in the Carolands carries major liability for repair and service disruption. Our crew manages the 811 ticket and concurrently files the Hillsborough Town Hall permit application to align the start date.
Do smart gates meet California pool fence requirements?
Yes. An integrated smart gate with an ASTM F1908-16 certified self-closing, self-latching mechanism meets the state's 60-inch minimum height requirement. The 2026 trend uses IoT access control with tamper alerts and video verification, which creates an auditable record to satisfy modern liability standards for Hillsborough homeowners with pools.
