Top Fencing Companies in Los Angeles, CA, 90001 | Compare & Call
There are 237 fencing companies server in Los Angeles CA
J & J Fence and Construction has been a family-owned fencing contractor serving Compton and Los Angeles County since 1978. Fully licensed, bonded, and insured, we specialize in chain link, wrought iro...
So Cal Fencing Solutions is an accredited fence contractor serving Santa Ana and all of Orange County, California. We specialize exclusively in high-quality vinyl fence and gate installations for resi...
Republic Fence in Chatsworth, CA has been a trusted name in fencing and gate contracting since 1951. We specialize in the installation, repair, and maintenance of a wide range of fencing materials, in...
Ferrum Triangulum Iron Works
Ferrum Triangulum Iron Works serves Glendale, CA, specializing in handcrafted metal fabrication for residential and commercial clients. Located near the Glendale Galleria and Brand Boulevard, the comp...
Metro GDS Garage Door and Gate Services, founded by Ayal Mustakis in 2010, is a licensed and bonded provider serving Los Angeles homeowners and businesses. With over 12 years of hands-on experience, w...
CQ Fence, a family-owned fencing company in Woodland Hills, CA, has over two decades of experience delivering custom fencing and gate solutions. Starting as a subcontractor for Los Angeles general con...
Mulholland Gates
Mulholland Gates, established in 1994 by Avi Ben David, began as a comprehensive home security provider before evolving into Southern California's premier manufacturer and installer of custom aluminum...
Socal Garage Door & Gates Services
Since 2002, Socal Garage Door & Gates Services has been a family-owned business serving Los Angeles homeowners and businesses with reliable garage door, gate, and fence solutions. We specialize in cus...
Valley Tree Decking is a general contractor based in Los Angeles, specializing in decks, fences, railings, and pergolas. They use only the highest quality materials—hardwood, aluminum, vinyl, and stee...
Teak Guy is a specialized refinishing service based in Lynwood, CA, focusing on teak furniture, decks, fences, and outdoor fixtures. With years of hands-on experience, we understand how Southern Calif...
Estimated Fencing Costs in Los Angeles, CA
Q&A
What is the typical timeline for a consultation and start date?
We dispatch from the Heritage Square Museum area. The route via CA-110 allows for a site consultation within 45-60 minutes for most Highland Park addresses. After the survey and permit approval, mobilization typically occurs within 10-14 business days, depending on material lead times and the HPOZ review schedule, if applicable.
Why do fence posts in Highland Park fail so often?
Post failure is a structural footing issue. The 12-inch frost depth in Los Angeles requires footings below this line to prevent frost heave. Posts set in concrete above the frost line will lift during winter temperature drops, causing racking and collapse. IRC Section R403.1.4 mandates this for stability against the 110 MPH V-ult wind load.
Do smart gates meet California pool safety codes?
Yes, integrated systems meet modern liability standards. LA Building Code Section 3109 requires pool barriers with self-closing, self-latching gates. A smart gate with an IoT-controlled latch that automatically engages provides a digital audit trail, satisfying both the code and the high trend toward automated property security for homeowners.
What are the height and location rules for my property line?
Zoning limits are 3.5 feet for front yards and 8 feet for rear yards, measured from the grade. The 0-foot setback allows building on the property line. Corner lots must maintain a visibility 'sight triangle'—a 10-foot area clear of obstructions from the intersection—which is critical for safety near major arterials like CA-110.
What is required before digging fence post holes?
State law requires contacting DigAlert (811) at least two working days before excavation. Hitting a gas, water, or fiber line in Highland Park creates major liability for repair costs and service disruptions. Our process includes managing the DigAlert ticket and pulling all necessary permits from the LADBS office to ensure compliance.
How is my fence designed for high winds?
The design uses the 110 MPH V-ult wind speed rating from ASCE 7-22 standards. This ultimate wind load dictates post spacing, concrete footing diameter, and bracket strength. A fence built to this specification will survive peak storm season gusts, especially in areas with higher exposure near the CA-110 corridor.
What are my legal duties before replacing a shared fence line?
California Civil Code 841 governs partition fences. In Los Angeles, the 2026 amendment requires written notice to adjoining owners 30 days prior to construction or replacement of a shared boundary. This 'Good Neighbor' law establishes cost-sharing frameworks and prevents disputes. HPOZ districts add a separate review layer.
Which fence materials last in Highland Park's soil?
Material compatibility dictates longevity. The 'Very Heavy' termite risk demands pressure-treated wood or non-organic composites. The 'Moderate' soil corrosivity index requires hot-dip galvanized or stainless steel fasteners. Using standard steel brackets or nails will cause rust streaks and premature failure of the connection points.
