Top Fencing Companies in Los Angeles, CA, 90001 | Compare & Call
There are 237 fencing companies server in Los Angeles CA
Founded in 1994 by Jose Guardado, GO Iron Works in Carson, CA, brings over 20 years of experience to custom metalwork. Born in Los Mochis, Sinaloa, Mexico, Jose learned welding as an apprentice in Ari...
Pacific Vinyl Fences
Pacific Vinyl Fences, based in Glendale, CA, is a licensed provider specializing in vinyl fences, gates, decks, and patio covers. Their products, all backed by a limited lifetime warranty, include dur...
Beyond Gates Fences & Doors serves Los Angeles, CA, specializing in fences, gates, awnings, and door sales/installation. The company addresses common local fencing issues like post instability caused ...
Herrera’s Welding is a trusted metal fabricator and fence specialist serving Los Angeles, CA. With years of experience, they address common local fencing problems such as soil erosion around fence pos...
Vinyl Land Fencing, a family-owned business established in 2000, serves Baldwin Park and the greater Los Angeles area with high-quality vinyl fencing, gates, decks, and patio covers. We use materials ...
High 5 Fencing is a licensed, bonded, and insured fence contractor serving Lake Los Angeles and surrounding areas. We eliminate the middleman to offer contractor-direct pricing without sacrificing qua...
Diego Iron Company in Lancaster, CA, has been crafting custom wrought iron pieces since 2008. Born from a passion for architecture and real estate, the company designs, manufactures, and installs deco...
Metal garage doors gates & fences
Since 2010, MHD Corporation has been a licensed contractor (license #991929) serving Tarzana and the greater Los Angeles area. We specialize in custom metal fabrication, concrete work, and the install...
Jc Roll-Up Doors & Folding Gates has been serving Los Angeles since 2008, after the owner spent years installing metal fences, gates, and roll-up doors for a local company starting in 2002. Based in t...
Alex is a professional carpenter based in the San Fernando Valley, CA, specializing in the installation of pre-made cabinets and built-in furniture. With a focus on kitchens, closets, and other custom...
Estimated Fencing Costs in Los Angeles, CA
Q&A
What is the typical timeline for a consultation and start date?
We dispatch from the Heritage Square Museum area. The route via CA-110 allows for a site consultation within 45-60 minutes for most Highland Park addresses. After the survey and permit approval, mobilization typically occurs within 10-14 business days, depending on material lead times and the HPOZ review schedule, if applicable.
Why do fence posts in Highland Park fail so often?
Post failure is a structural footing issue. The 12-inch frost depth in Los Angeles requires footings below this line to prevent frost heave. Posts set in concrete above the frost line will lift during winter temperature drops, causing racking and collapse. IRC Section R403.1.4 mandates this for stability against the 110 MPH V-ult wind load.
Do smart gates meet California pool safety codes?
Yes, integrated systems meet modern liability standards. LA Building Code Section 3109 requires pool barriers with self-closing, self-latching gates. A smart gate with an IoT-controlled latch that automatically engages provides a digital audit trail, satisfying both the code and the high trend toward automated property security for homeowners.
What are the height and location rules for my property line?
Zoning limits are 3.5 feet for front yards and 8 feet for rear yards, measured from the grade. The 0-foot setback allows building on the property line. Corner lots must maintain a visibility 'sight triangle'—a 10-foot area clear of obstructions from the intersection—which is critical for safety near major arterials like CA-110.
What is required before digging fence post holes?
State law requires contacting DigAlert (811) at least two working days before excavation. Hitting a gas, water, or fiber line in Highland Park creates major liability for repair costs and service disruptions. Our process includes managing the DigAlert ticket and pulling all necessary permits from the LADBS office to ensure compliance.
How is my fence designed for high winds?
The design uses the 110 MPH V-ult wind speed rating from ASCE 7-22 standards. This ultimate wind load dictates post spacing, concrete footing diameter, and bracket strength. A fence built to this specification will survive peak storm season gusts, especially in areas with higher exposure near the CA-110 corridor.
What are my legal duties before replacing a shared fence line?
California Civil Code 841 governs partition fences. In Los Angeles, the 2026 amendment requires written notice to adjoining owners 30 days prior to construction or replacement of a shared boundary. This 'Good Neighbor' law establishes cost-sharing frameworks and prevents disputes. HPOZ districts add a separate review layer.
Which fence materials last in Highland Park's soil?
Material compatibility dictates longevity. The 'Very Heavy' termite risk demands pressure-treated wood or non-organic composites. The 'Moderate' soil corrosivity index requires hot-dip galvanized or stainless steel fasteners. Using standard steel brackets or nails will cause rust streaks and premature failure of the connection points.
