Top Fencing Companies in South Pasadena, CA, 91030 | Compare & Call

There are 236 fencing companies server in South Pasadena CA

Atwater Fine Carpentry

Atwater Fine Carpentry

★★★★★ 5.0 / 5 (2)
Los Angeles CA 90039
Carpenters, Fences & Gates, Cabinetry

Atwater Fine Carpentry, a small business rooted in Atwater Village, Los Angeles, brings over 15 years of hands-on experience to every project. We specialize in bespoke woodwork, from custom gates and ...

Garcis Welding Shop

Garcis Welding Shop

★★★★☆ 4.4 / 5 (7)
7515 S Central Ave, Los Angeles CA 90001
Metal Fabricators, Fences & Gates

Garcis Welding Shop, based in Los Angeles, specializes in metal fabrication, fence and gate services, and welding repairs for both residential and commercial clients. From custom automatic gates to st...

National Deck & Stair

National Deck & Stair

★★★★☆ 3.8 / 5 (44)
2770 E Slauson Ave, Huntington Park CA 90255
Decks & Railing, Waterproofing, Fences & Gates

National Deck & Stair, a family-owned and operated Los Angeles company, has served Huntington Park and the surrounding areas for nearly 20 years. We specialize in waterproof deck and stair coatings, o...

Fence Guys

Fence Guys

★★★★☆ 4.2 / 5 (13)
3314 Kelburn Ave, Rosemead CA 91770
Fences & Gates

Fence Guys in Rosemead, CA is a licensed fencing contractor owned by Jerson. The company focuses on delivering an exceptional experience from start to finish, with customer satisfaction as the top pri...

LA Fence Craft

LA Fence Craft

★★★★★ 4.5 / 5 (209)
2088 Central Ave Ste D, Duarte CA 91010
Fences & Gates, Patio Coverings, Decks & Railing

LA Fence Craft, based in Duarte, CA, is a licensed and bonded fencing company serving residential and commercial clients since 2016. We specialize in custom fencing solutions using vinyl, wood, and al...

SPC Garage Doors

SPC Garage Doors

★★★★★ 5.0 / 5 (9)
Los Angeles CA 90028
Garage Door Services, Fences & Gates

SPC Garage Doors, founded by brothers Tyler and Owen, is a family-owned business serving Los Angeles, CA. With a focus on professionalism and quality workmanship, we specialize in expert garage door i...

Nathans Pool Fence

Nathans Pool Fence

★★★★★ 4.8 / 5 (313)
430 w Imperial Hwy, Brea CA 92821
Fences & Gates, Childproofing

Nathan’s Pool Fence is a family-owned business based in Brea, CA, that has been manufacturing and installing custom pool fences since 2002. We specialize in childproofing and offer both removal and in...

E & E Custom Iron Works

E & E Custom Iron Works

★★★★★ 4.7 / 5 (104)
15150 Valley Blvd Ste B, La Puente CA 91746
Fences & Gates

E & E Custom Iron Works is a family-owned business in La Puente, CA, with over 15 years of experience in wrought iron gates, handrails, motorized gates, and custom metal fabrication. Operating from a ...

United Iron Works

United Iron Works

★★★★★ 4.6 / 5 (54)
13748 Desmont St, Pacoima CA 91331
Fences & Gates, Metal Fabricators, Decks & Railing

United Iron Works, established in 2008 in Pacoima, CA, is a metal fabrication company specializing in custom wood gates, wrought iron designs, spiral stairs, and metal handrails. We also offer guardra...

Matthew Fitzgerald Welding

Matthew Fitzgerald Welding

★★★★★ 5.0 / 5 (4)
Kagel Canyon CA 91342
Fences & Gates, Metal Fabricators

Matthew Fitzgerald Welding provides durable, secure, and visually appealing metal solutions to residents and businesses in Kagel Canyon, CA. Specializing in custom fencing, gate installation, and gene...



Estimated Fencing Costs in South Pasadena, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for South Pasadena. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for fences in South Pasadena?

Zoning limits are 4 feet in the front yard and 6 feet in the rear. The 4-foot limit applies within the front yard setback, which is typically 20 feet from the property line. On corner lots, a 10-foot 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet high. This is critical for visibility near major arteries like CA-110. In historic districts, any fence visible from the street requires design review approval.

How does the 105 MPH wind rating affect my fence design?

The 105 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This engineering requirement dictates post spacing, concrete footing mass, and bracket strength. For a solid-panel fence, post spacing must not exceed 8 feet on center. Use through-bolt connections, not just lag screws. This design resists the peak storm season gusts that funnel through the Arroyo Seco and near CA-110, preventing overturning failure.

What are my legal duties to my neighbor when building a fence in South Pasadena?

California Civil Code Section 841 requires written notice to adjoining owners at least 30 days before replacing a shared boundary fence. As of 2026, this notice must include a Good Neighbor Fence Act disclosure and proposed cost estimates. For a new partition fence on the property line, you are jointly responsible for a 'sufficient' fence. Failure to provide proper notice can result in liability for the full cost.

Do smart gates and IoT locks meet California pool safety codes?

Yes, when integrated correctly. California Building Code Chapter 31B and ASTM F1908-16 require pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate system must have a primary mechanical latch that automatically engages and a secondary IoT lock. The system must send an alert if the gate is propped open. This dual-layer compliance is now the standard for managing liability in 2026.

What fencing materials work best in South Pasadena's soil and climate?

Material compatibility is critical. The soil has a moderate corrosivity index, requiring G90 galvanized or powder-coated steel hardware to prevent rust streaks. With a 'Very Heavy' termite risk, avoid wood posts in direct ground contact. Use concrete-filled steel posts or pressure-treated lumber rated for ground contact. Composite or aluminum panels are low-maintenance alternatives that resist both corrosion and insect damage.

What is your typical response time for a consultation in South Pasadena?

Our standard consultation dispatch is 25-40 minutes from notification. For the Oaklawn area, our route originates from the South Pasadena Public Library landmark, proceeding via CA-110 to minimize transit time. We schedule site assessments within a 48-hour window to evaluate footing conditions, wind exposure, and zoning constraints before providing a firm engineering and installation plan.

Why do concrete footings for fence posts fail in South Pasadena?

Post footings must extend below the 12-inch frost line to prevent frost heave. In the Oaklawn neighborhood, soil saturation from winter rains can freeze, causing un-anchored posts to lift and fail. IRC Section R403.1.4 requires footings to be a minimum of 12 inches below undisturbed earth. A 24-inch deep, 8-inch diameter concrete footing is the standard for a 6-foot fence to resist both frost and the 105 MPH V-ult wind load.

What is the utility locate and permitting process in South Pasadena?

State law requires a DigAlert (811) ticket at least two working days before excavation. In Oaklawn, hitting a gas, water, or fiber optic line is a major liability that can incur thousands in repair costs and fines. The City's Permit Office requires a site plan, material specs, and, for historic districts, a separate design review application. We manage this paperwork to ensure your project starts without delay or violation.



Scroll to Top
CALL US NOW