Top Fencing Companies in South Pasadena, CA, 91030 | Compare & Call

There are 236 fencing companies server in South Pasadena CA

Joes Arc Welding

Joes Arc Welding

★★★★★ 5.0 / 5 (28)
El Monte CA 91734
Metal Fabricators, Fences & Gates

Joe's Arc Welding is a licensed welding service based in El Monte, CA, specializing in iron gates, security gates, and gate motors for both residential and commercial properties. As a small, owner-ope...

Superior Fence & Rail

Superior Fence & Rail

★★★★★ 4.6 / 5 (20)
City of Industry CA 91746
Fences & Gates

Superior Fence & Rail in City of Industry, CA, has built a reputation for reliable fence and gate services across Northeastern Los Angeles. From the initial consultation through installation and beyon...

LA Decks

LA Decks

★★★★★ 5.0 / 5 (6)
1055 E Colorado Blvd Fl 5, Pasadena CA 91106
Decks & Railing, Siding, Fences & Gates

LA Decks, owned by Noa L., has been crafting custom outdoor living spaces since 1995. Based in Los Angeles and serving Orange County, we specialize in deck construction, design, and replacement using ...

All County Fence And Gates

All County Fence And Gates

★★★★★ 4.7 / 5 (67)
Tarzana CA 91356
Fences & Gates, Masonry/Concrete

All County Fence And Gates is a family-owned and operated fencing contractor serving Tarzana and the surrounding San Fernando Valley for over 35 years. We specialize in the installation, repair, and m...

Duran Custom Iron Gates

Duran Custom Iron Gates

★★★★★ 4.6 / 5 (48)
Perris CA 92570
Fences & Gates

Duran Custom Iron Gates is a family-owned metalwork business serving Perris, CA, and the surrounding area. We specialize in the fabrication and installation of custom iron gates, fencing, and related ...

BNJ Iron Works

BNJ Iron Works

★★★★★ 4.8 / 5 (27)
8206 Salt Lake Ave, Cudahy CA 90201
Fences & Gates, Masonry/Concrete, Metal Fabricators

BNJ Iron Works, Inc. has been a family-owned business serving Cudahy since 1974, offering expert fence and gate installation, repair, and weatherproofing. We specialize in masonry and concrete work—in...

Western Fence Co.

Western Fence Co.

★★★★☆ 4.1 / 5 (63)
2652 Fair Oaks Ave, Altadena CA 91001
Fences & Gates

Western Fence Co. has been serving Altadena and the surrounding communities since 1967. As a third-generation, family-owned business, we take pride in our reputation for quality workmanship and reliab...

LA Fence Craft

LA Fence Craft

★★★★☆ 4.0 / 5 (4)
Rosemead CA 91770
Fences & Gates, Patio Coverings, Decks & Railing

LA Fence Craft, located in Rosemead, CA, specializes in fence and gate installation, repair, and staining, as well as deck and patio cover construction. Serving neighborhoods near Garvey Avenue and Ro...

CBJ Studio

CBJ Studio

★★★★★ 5.0 / 5 (2)
Los Angeles CA 90039
Painters, Refinishing Services, Fences & Gates

CBJ Studio is a Los Angeles-based contracting company specializing in painting, refinishing, and fence and gate services. Serving neighborhoods from Silver Lake to Sherman Oaks, the team handles every...

SOL Garage Doors & Gates

SOL Garage Doors & Gates

★★★★★ 4.7 / 5 (46)
Pasadena CA 91101
Garage Door Services, Fences & Gates

SOL Garage Doors & Gates has been serving Pasadena residents since 2008. As a locally owned and operated business, owner Dave and his team focus on building long-term relationships through reliable se...



Estimated Fencing Costs in South Pasadena, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for South Pasadena. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for fences in South Pasadena?

Zoning limits are 4 feet in the front yard and 6 feet in the rear. The 4-foot limit applies within the front yard setback, which is typically 20 feet from the property line. On corner lots, a 10-foot 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet high. This is critical for visibility near major arteries like CA-110. In historic districts, any fence visible from the street requires design review approval.

How does the 105 MPH wind rating affect my fence design?

The 105 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This engineering requirement dictates post spacing, concrete footing mass, and bracket strength. For a solid-panel fence, post spacing must not exceed 8 feet on center. Use through-bolt connections, not just lag screws. This design resists the peak storm season gusts that funnel through the Arroyo Seco and near CA-110, preventing overturning failure.

What are my legal duties to my neighbor when building a fence in South Pasadena?

California Civil Code Section 841 requires written notice to adjoining owners at least 30 days before replacing a shared boundary fence. As of 2026, this notice must include a Good Neighbor Fence Act disclosure and proposed cost estimates. For a new partition fence on the property line, you are jointly responsible for a 'sufficient' fence. Failure to provide proper notice can result in liability for the full cost.

Do smart gates and IoT locks meet California pool safety codes?

Yes, when integrated correctly. California Building Code Chapter 31B and ASTM F1908-16 require pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate system must have a primary mechanical latch that automatically engages and a secondary IoT lock. The system must send an alert if the gate is propped open. This dual-layer compliance is now the standard for managing liability in 2026.

What fencing materials work best in South Pasadena's soil and climate?

Material compatibility is critical. The soil has a moderate corrosivity index, requiring G90 galvanized or powder-coated steel hardware to prevent rust streaks. With a 'Very Heavy' termite risk, avoid wood posts in direct ground contact. Use concrete-filled steel posts or pressure-treated lumber rated for ground contact. Composite or aluminum panels are low-maintenance alternatives that resist both corrosion and insect damage.

What is your typical response time for a consultation in South Pasadena?

Our standard consultation dispatch is 25-40 minutes from notification. For the Oaklawn area, our route originates from the South Pasadena Public Library landmark, proceeding via CA-110 to minimize transit time. We schedule site assessments within a 48-hour window to evaluate footing conditions, wind exposure, and zoning constraints before providing a firm engineering and installation plan.

Why do concrete footings for fence posts fail in South Pasadena?

Post footings must extend below the 12-inch frost line to prevent frost heave. In the Oaklawn neighborhood, soil saturation from winter rains can freeze, causing un-anchored posts to lift and fail. IRC Section R403.1.4 requires footings to be a minimum of 12 inches below undisturbed earth. A 24-inch deep, 8-inch diameter concrete footing is the standard for a 6-foot fence to resist both frost and the 105 MPH V-ult wind load.

What is the utility locate and permitting process in South Pasadena?

State law requires a DigAlert (811) ticket at least two working days before excavation. In Oaklawn, hitting a gas, water, or fiber optic line is a major liability that can incur thousands in repair costs and fines. The City's Permit Office requires a site plan, material specs, and, for historic districts, a separate design review application. We manage this paperwork to ensure your project starts without delay or violation.



Scroll to Top
CALL US NOW