Top Fencing Companies in Nampa, ID, 83651 | Compare & Call

There are 167 fencing companies server in Nampa ID

Northwest Painting

Northwest Painting

★★★★★ 5.0 / 5 (6)
Meridian ID 83642
Painters, Fences & Gates, Decks & Railing

Northwest Painting, based in Meridian, ID, provides expert deck construction, repair, and replacement, along with comprehensive interior and exterior painting and staining services. Many homes in neig...

Pro-Built Fence Llc.

Pro-Built Fence Llc.

★☆☆☆☆ 1.0 / 5 (4)
3313 W Cherry Ln Ste 424, Meridian ID 83642
Fences & Gates

Pro-Built Fence LLC, based in Meridian, ID, specializes in residential and commercial fence and gate installations. Meridian’s unique climate—with hot, dry summers and cold, wet winters—can cause wood...

Rolling Hills Sprinklers

Rolling Hills Sprinklers

1557 W Washam Rd, Eagle ID 83616
Landscaping, Irrigation, Fences & Gates

Rolling Hills Sprinklers, based in Eagle, ID, specializes in landscaping, irrigation, fencing, and gates. Many Eagle homes face fencing issues due to the region's high winds, temperature swings, and d...

ZD Fencing

ZD Fencing

3660 N Falcon Ridge Ln, Eagle ID 83616
Fences & Gates

ZD Fencing LLC is a family-owned fencing company based in Eagle, ID, serving the Treasure Valley for over three years. Specializing in both residential and commercial projects, we provide fence instal...

ATTC

ATTC

Mountain Home ID 83647
Fences & Gates

ATTC, based in Mountain Home, Idaho, specializes in installing and servicing fences and gates, with a focus on Petrified Forest concrete fencing. Made in America, these concrete fences offer a durable...

Big E's Services

Big E's Services

★★★★★ 5.0 / 5 (1)
Mountain Home ID 83647
Landscaping, Masonry/Concrete, Fences & Gates

Big E's Services is your trusted local partner for landscaping, masonry/concrete, and fence and gate solutions in Mountain Home, ID. Located near the Mountain Home Air Force Base and downtown, we spec...

Barber’s Custom Fabrication

Barber’s Custom Fabrication

Melba ID 83641
Metal Fabricators, Fences & Gates, Decks & Railing

Barber’s Custom Fabrication LLC is a Veteran-owned and operated small business based in Melba, Idaho. We provide mobile welding and fabrication services throughout the Treasure Valley. Our expertise c...

Evans Iron Design

Evans Iron Design

1307 S Arcadia St, Boise ID 83705
Fences & Gates

Evans Iron Design in Boise, ID specializes in custom wrought iron fences and gates, addressing the common local issue of rust and weather damage from Boise's seasonal extremes. Their durable, powder-c...

Goodman Construction

Goodman Construction

Meridian ID 83642
Fences & Gates, Decks & Railing

Goodman Construction, based in Meridian, ID, specializes in deck and fence services, addressing common local issues like weather-worn fences and aging decks. From sagging gates to rotted deck boards, ...

O'Connor Building & Design

O'Connor Building & Design

★★☆☆☆ 2.3 / 5 (3)
Meridian ID 83642
General Contractors, Architects, Fences & Gates

O'Connor Building & Design is a family-owned and operated LLC based in Meridian, ID, bringing over 30 years of hands-on construction experience to the Treasure Valley. We specialize in custom home bui...



Estimated Fencing Costs in Nampa, ID

Emergency Fence/Gate RepairStorm / Security Response
$314 - $419
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $69
Standard Driveway Gate InstallEstimated Range
$1,124 - $1,499

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Nampa. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Are smart gates a good security and safety upgrade?

Integrated IoT gate systems address both security trends and liability. A smart latch with auto-close and remote monitoring meets the intent of IBC 2018 and Nampa's Appendix AG pool barrier codes, which require self-closing, self-latching devices. This integration creates a documented layer of compliance, reducing homeowner liability in Idaho by ensuring the barrier is never accidentally left open.

Is a standard fence strong enough for Nampa's wind?

No. Nampa's 115 MPH V-ult wind speed rating dictates engineering. Standard 8-foot panel spacing will fail. Structural design per ASCE 7-22 requires reduced post spacing (often 6 feet on-center), deeper concrete footings, and wind-rated brackets. This engineering ensures the fence can survive peak storm season gusts, particularly in open areas or neighborhoods with high exposure like those near Lakeview Park.

Why do fence posts in Nampa need to be set so deep?

The 24-inch frost line depth in Canyon County is a structural mandate. Footings that stop above this line are subject to frost heave, which lifts posts out of alignment and causes premature failure. In Downtown Nampa's clay soils, this is a primary failure mode. IRC Figure R403.1(3) requires footings to extend a minimum of 12 inches below undisturbed soil and below the frost line. Posts set at 30 inches with concrete provide the necessary stability.

What is the best fencing material for Nampa's soil and pests?

Material compatibility is dictated by local soil corrosivity and termite risk. Nampa's moderate soil corrosivity index requires hot-dip galvanized steel posts and brackets to prevent rust streaks. For wood components, pressure-treated lumber rated for ground contact is mandatory. The moderate termite risk level makes untreated wood, like cedar, unsuitable for post bases or structural members in direct soil contact.

How soon can a project consultation be scheduled?

Consultations are scheduled within 48 hours. The standard dispatch route from our central staging area near Lakeview Park uses I-84 for access, ensuring a consistent 15-25 minute response window to most Downtown Nampa properties. The consultation includes a site survey, verification of property lines, and a review of all zoning and engineering requirements specific to your lot.

What is required before digging fence post holes?

Call Idaho 811 at least two full business days before excavation. This free utility locate service is a non-negotiable step. Hitting a gas, fiber, or power line in Downtown Nampa results in major repair costs, service outages, and significant liability. The fencing contractor typically manages the City of Nampa permit office paperwork, which requires the 811 ticket number and a site plan before a permit is issued.

How high can I build my fence in my front yard?

Nampa zoning limits front yard fences to 4 feet in height. The 0-foot setback allows installation directly on the property line. For corner lots, a critical 'sight triangle' clearance is enforced. No obstructions over 3 feet high are permitted within 25 feet of the intersection property lines. This rule is strictly applied near high-traffic corridors like I-84 to maintain driver visibility and prevent accidents.

Do I need to tell my neighbor if I replace our shared fence?

Yes. Idaho Code 35-101, the partition fence statute, establishes a legal duty for adjoining landowners. For a shared boundary line in Nampa, you must provide written notice to the adjacent property owner before construction begins. This 2026 standard practice prevents disputes and clarifies cost-sharing responsibilities for maintenance of the division fence.



Scroll to Top
CALL US NOW