Top Fencing Companies in Fresno, TX, 77545 | Compare & Call
There are 237 fencing companies server in Fresno TX
All City Fence, LLC is a locally owned and operated fence and deck company serving Austin and the surrounding areas, including Manor, Georgetown, Round Rock, Buda, and Kyle. For the past 10 years, own...
Europa Fencing is a local fence and gate company serving Liberty Hill, TX, and the surrounding areas. Located near the Liberty Hill City Park and just off Loop 332, they specialize in tackling common ...
DePaolo Certified Mobile Welding, founded by Mathew DePaolo, brings professional, certified welding services to Austin, TX. With a background serving high-profile clients in San Diego—including UCSD M...
Roof Monkey, led by Eric, a construction nerd with a BS from Texas A&M and advanced degrees in construction, brings 19 years of hands-on experience to Austin. Eric grew up in NW Austin and now lives i...
E5 Gate Services, based in Bartlett, TX, is a family-operated business with 20 years of hands-on experience in the fence and gate industry. As a co-owner and manager, I have overseen fence installatio...
S J Design Weld and Fabrication
S J Design Weld and Fabrication in Liberty Hill, TX, specializes in metal fabrication and fence services for residential, commercial, and multifamily clients. Known for precise work and thorough atten...
Tex-Grade Welding LLC provides mobile and shop-based welding and fabrication services to Florence, TX, and the surrounding area. The company specializes in pipe fencing, custom gates, and general weld...
Bravo Fence Solutions is a veteran-owned fencing company serving Temple, Texas, and the surrounding area. We specialize in the installation, repair, and maintenance of a wide range of fencing and gate...
Jerry Fence brings a personal approach to fence and gate work in Austin, TX. Every installation and repair is handled as if it were for our own home, with close attention to detail and a focus on hone...
Pacheco's Custom Welding provides expert metal fabrication and fence/gate services to Del Valle, TX, and surrounding areas. We specialize in solving common local problems like gate sagging and fence p...
Estimated Fencing Costs in Fresno, TX
FAQs
What is the typical timeline and route for a consultation in Fresno, TX?
We dispatch from the Fresno Community Park area. Travel via Texas State Highway 288 to most neighborhoods in the district takes 35-45 minutes. Following the utility locate and permit approval, field work typically begins within 5-7 business days, depending on the current labor schedule averaging $38 per hour for skilled installation.
What are the height and setback rules for fences in my Fresno, TX yard?
Fresno zoning limits fences to 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots near Texas State Highway 288 require a clear 'sight triangle'—typically a 10-foot area from the property corner—free of visual obstructions above 3 feet for driver safety.
What are my legal duties when replacing a shared fence on the property line?
Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to adjoining landowners before altering a shared boundary fence in Fresno. The 2026 update clarifies this applies to full replacement. Provide notice 30 days prior to work to avoid disputes and potential claims for partition fence contribution.
How does the 125 MPH V-ult wind speed rating impact fence design?
The 125 MPH ultimate design wind speed (V-ult) from ASCE 7-22 standards dictates engineering. For Fresno's peak storm season, this requires reduced post spacing (often 6-foot centers), deeper concrete footings, and wind-rated structural brackets. A standard 'privacy' panel fence will fail without these calculations to handle uplift and shear forces.
How do smart gates and pool safety codes intersect for modern fences?
A self-closing, self-latching gate meeting IBC/IRC Appendix AG is mandatory for pools. The moderate smart-gate trend integrates IoT-controlled latches that log access and confirm secure closure, providing both compliance and a digital audit trail. This integration is a best practice for managing liability under Texas premises law.
How do Fresno's soil and termite risks affect material selection?
Very heavy termite risk and moderate soil corrosivity dictate material compatibility. Pressure-treated pine must be rated for ground contact and include a termiticide. For metal posts and hardware, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks from corrosive soil, which degrades both appearance and structural integrity.
What is the utility locate and permit process before digging in Fresno?
Call Texas 811 at least two business days before excavation. They mark public utility lines. Hitting an unmarked line in the Fresno Residential District is a major liability for repair costs and service disruption. Concurrently, file for a fence permit with the local office; the 811 ticket is typically a required attachment for approval.
Why is the frost line critical for fence post footings in Fresno, TX?
The 6-inch frost line in the Fresno Residential District requires footings to extend below this depth. Shallow posts will lift from frost heave, causing permanent racking and failure. IRC Section R403.1.4 mandates this depth to ensure your fence withstands seasonal soil movement without costly realignment.