Top Fencing Companies in Fresno, TX, 77545 | Compare & Call
There are 237 fencing companies server in Fresno TX
Texas Better Care Fencing & Home Repair has been serving Killeen and surrounding areas from Waco to Round Rock with reliable fence and gate solutions. We understand the unique challenges of Central Te...
MT Fences is an employee-owned fencing contractor based in Killeen, TX, serving commercial and residential properties from Waco to Georgetown. Originally established as T&R Fence, the company became e...
MJG Fence, owned by Michael Graham, has been serving Killeen and Central Texas since 2001 with a focus on fences, gates, decks, and arbors. Originally founded in Dallas, the company relocated to Centr...
Maynard Painting & Home Repair
Since 1995, Maynard Painting & Home Repair has served Central Texas from its Killeen base, bringing decades of experience in painting, drywall, and fencing. Originally established in Austin, the famil...
Affordable Fences, owned by Ryan, has served Central Texas since 1998. Starting as a one-man operation handling everything from estimates to carpentry, the business grew through a focus on customer se...
Fence USA
Fence USA, a family-owned and veteran-operated fencing contractor, has served Harker Heights and Central Texas since 2005. Founded by Kenneth W. Ondreako, our team brings over 20 years of experience i...
Brokenhorn has been serving Copperas Cove, TX, since 2005, starting as a handyman service before focusing on fences, gates, decks, and patio coverings. With 20 years of building experience, the owner ...
CenTex Fence has been a trusted name in Belton and Central Texas since 1957. As a family and veteran-operated business, we specialize in installing, repairing, and maintaining fences and gates for res...
Combat Muscle Fence and Stain, established in 2008, is a military veteran-owned company serving Killeen, TX. We specialize in fence installation, repair, and staining, offering options like decorative...
Killeen Fence Company of Texas has been serving Killeen and surrounding communities for over two decades, building quality fences and gates. The owner, who started fencing at age 13 with his father's ...
Estimated Fencing Costs in Fresno, TX
FAQs
What is the typical timeline and route for a consultation in Fresno, TX?
We dispatch from the Fresno Community Park area. Travel via Texas State Highway 288 to most neighborhoods in the district takes 35-45 minutes. Following the utility locate and permit approval, field work typically begins within 5-7 business days, depending on the current labor schedule averaging $38 per hour for skilled installation.
What are the height and setback rules for fences in my Fresno, TX yard?
Fresno zoning limits fences to 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots near Texas State Highway 288 require a clear 'sight triangle'—typically a 10-foot area from the property corner—free of visual obstructions above 3 feet for driver safety.
What are my legal duties when replacing a shared fence on the property line?
Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to adjoining landowners before altering a shared boundary fence in Fresno. The 2026 update clarifies this applies to full replacement. Provide notice 30 days prior to work to avoid disputes and potential claims for partition fence contribution.
How does the 125 MPH V-ult wind speed rating impact fence design?
The 125 MPH ultimate design wind speed (V-ult) from ASCE 7-22 standards dictates engineering. For Fresno's peak storm season, this requires reduced post spacing (often 6-foot centers), deeper concrete footings, and wind-rated structural brackets. A standard 'privacy' panel fence will fail without these calculations to handle uplift and shear forces.
How do smart gates and pool safety codes intersect for modern fences?
A self-closing, self-latching gate meeting IBC/IRC Appendix AG is mandatory for pools. The moderate smart-gate trend integrates IoT-controlled latches that log access and confirm secure closure, providing both compliance and a digital audit trail. This integration is a best practice for managing liability under Texas premises law.
How do Fresno's soil and termite risks affect material selection?
Very heavy termite risk and moderate soil corrosivity dictate material compatibility. Pressure-treated pine must be rated for ground contact and include a termiticide. For metal posts and hardware, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks from corrosive soil, which degrades both appearance and structural integrity.
What is the utility locate and permit process before digging in Fresno?
Call Texas 811 at least two business days before excavation. They mark public utility lines. Hitting an unmarked line in the Fresno Residential District is a major liability for repair costs and service disruption. Concurrently, file for a fence permit with the local office; the 811 ticket is typically a required attachment for approval.
Why is the frost line critical for fence post footings in Fresno, TX?
The 6-inch frost line in the Fresno Residential District requires footings to extend below this depth. Shallow posts will lift from frost heave, causing permanent racking and failure. IRC Section R403.1.4 mandates this depth to ensure your fence withstands seasonal soil movement without costly realignment.