Top Fencing Companies in Sam Rayburn, TX, 75931 | Compare & Call

There are 87 fencing companies server in Sam Rayburn TX

Mon-Tex Land Management

Mon-Tex Land Management

Robstown TX 78380
Landscaping, Landscape Architects or Designers, Fences & Gates

Mon-Tex Land Management, serving Robstown, TX, specializes in landscaping, landscape design, and fencing solutions. Located near the Robstown Community Center and just off Highway 77, we address commo...

Skid-R-Done

Skid-R-Done

Goliad TX 77963
General Contractors, Fences & Gates, Landscaping

Skid-R-Done LLC, based in Goliad, TX, is a family-owned general contractor specializing in fences, gates, landscaping, and home remodeling. Born from years of hands-on projects at our own home—buildin...

DJL Const

DJL Const

★☆☆☆☆ 1.0 / 5 (1)
Victoria TX 77905
Handyman, Fences & Gates, Landscaping

DJL Const, operating in Victoria, TX since 2001, brings over 25 years of hands-on experience in handyman services, fences and gates, and landscaping. Owner Danny Leal leads a team that prioritizes cus...

Taradise Contracting Services

Taradise Contracting Services

Rockport TX 78382
Fences & Gates, General Contractors, Handyman

Taradise Contracting Services is a Women-owned, local general contracting and handywoman business based in Rockport, TX. We specialize in residential and commercial fence and gate installation, repair...

Hammer Fist Construction

Hammer Fist Construction

Kingsville TX 78363
Fences & Gates, Demolition Services, Tree Services

Based in Kingsville, TX, Hammer Fist Construction offers expert demolition, tree services, and fencing & gates. Locals often face issues with vegetation damaging fence structures and fence discolorati...

Restore Builders

Restore Builders

★☆☆☆☆ 1.0 / 5 (1)
2501 Hwy 35 N Bypass, Rockport TX 78382
General Contractors, Decks & Railing, Fences & Gates

Restore Builders, a veteran-owned general contracting company in Rockport, TX, specializes in transforming outdoor areas into functional, custom living spaces. With a focus on custom outdoor kitchens,...

STX Works

STX Works

Sinton TX 78387
Fences & Gates, Decks & Railing

STX Works is a trusted provider of fence, gate, deck, and railing services for homeowners and businesses in Sinton, TX. Located conveniently near downtown Sinton and the historic San Patricio County C...

AR Energy Services

AR Energy Services

13908 State Hwy 188, Sinton TX 78387
Fences & Gates, Demolition Services, Masonry/Concrete

AR Energy Services is a licensed, insured company based in Sinton, Texas, specializing in demolition, fencing, and masonry/concrete work. They handle both small residential jobs and larger municipal p...

Bearded Bros Construction

Bearded Bros Construction

Sinton TX 78387
General Contractors, Roofing, Fences & Gates

Bearded Bros Construction is a family-owned and operated general contracting company serving Sinton, TX, and the surrounding Coastal Bend area. We specialize in residential and commercial construction...

B & A Ag Land Services

B & A Ag Land Services

Port Lavaca TX 77979
Excavation Services, Landscaping, Fences & Gates

B & A Ag Land Services LLC, established in 2018, is a family-owned business serving Port Lavaca and the surrounding areas. We specialize in agricultural, residential, and commercial site development a...



Estimated Fencing Costs in Sam Rayburn, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sam Rayburn. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Can I have an automatic gate for my pool area?

Yes, but the gate system must integrate with pool safety codes. Under IRC Appendix AG, any gate accessing a pool must be self-closing, self-latching, and a minimum of 48 inches high. In 2026, we use low-voltage IoT operators with integrated sensors that log every latch event. This creates an audit trail, meeting modern liability standards for Texas homeowners and the low-to-moderate smart gate trend in the area.

How deep should my fence posts be set in Sam Rayburn?

All posts in Sam Rayburn Residential require a minimum 12-inch footing depth to pass below the local frost line. Shallow posts will fail due to frost heave, which lifts footings and shatters concrete. This is a non-negotiable IRC standard. For 8-foot structures, we typically embed posts 30 inches deep to achieve required stability against the 115 MPH V-ult wind rating.

What is the best fence material for this area?

Material selection is critical. Sam Rayburn has a Very Heavy termite risk and a Moderate soil corrosivity index. Pressure-treated Southern Yellow Pine is the standard for wood, with borate treatment for termites. For metal, use only hot-dip galvanized or aluminum fasteners. Inferior hardware will rust, causing unsightly streaks and structural failure at the bracket connections within a few years.

What steps are required before you dig?

State law requires a Texas811 utility locate request at least two business days before excavation. Hitting a gas, water, or fiber line in Sam Rayburn Residential is a major liability involving repair costs and fines. We manage this process and all related permit office paperwork directly. The city will inspect the footing depth and setback before we proceed with the installation.

Is a standard fence strong enough for the wind here?

No. The 115 MPH V-ult wind speed rating dictates the structural design. A basic 8-foot panel will fail. We engineer for this by reducing standard post spacing from 8 feet to 6 feet, using 6x6 posts instead of 4x4, and specifying ASCE 7-22-rated hurricane brackets. This system is designed to survive peak storm season gusts, especially for properties with higher exposure near the Sam Rayburn Dam.

How soon can you start a project in my neighborhood?

Our standard consultation dispatch is 35-45 minutes. Our crew routes from the Sam Rayburn Dam area via US-96 to your property in Sam Rayburn Residential. After the site survey and contract signing, typical lead time for material procurement and permit approval is 10-14 business days before physical work begins. The local labor rate averages $32 per hour for skilled installation.

Do I need to tell my neighbor before building a fence?

Yes. Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to all adjoining property owners before replacing or building a shared boundary fence in Sam Rayburn. In 2026, this notice must be sent via certified mail or personal delivery at least 30 days prior to the start of work. This law prevents disputes over partition fence costs and property lines.

What are the height and placement rules for my fence?

Sam Rayburn zoning limits fence height to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows building directly on your property line. For corner lots, a clear 'sight triangle' is mandatory. This means no obstructions over 3 feet high within 25 feet of the intersection, especially critical for lots near US-96 to maintain driver visibility and meet municipal safety codes.



Scroll to Top
CALL US NOW