Top Fencing Companies in Sam Rayburn, TX, 75931 | Compare & Call

There are 87 fencing companies server in Sam Rayburn TX

All Seasons Fence

All Seasons Fence

★★★★★ 5.0 / 5 (1)
Victoria TX 77904
Fences & Gates

All Seasons Fence, based in Victoria, TX, is a family-owned business founded by Chad M. after years of working as a contractor. Chad brings over 20 years of professional experience to every project, d...

C&J Projects & Services

C&J Projects & Services

Victoria TX 77904
Decks & Railing, Fences & Gates, Landscaping

C&J Projects & Services, founded in Victoria, TX in 2020 by a former carpenter who left the oilfield to pursue meaningful work, provides deck construction, fencing, landscaping, and tree care. The own...

Imagine Concrete

Imagine Concrete

Cuero TX 77954
Fences & Gates, Masonry/Concrete, Foundation Repair

Imagine Concrete, based in Cuero, TX, delivers expert masonry, concrete, foundation repair, and fencing services to local homeowners and businesses. Our team specializes in addressing common area issu...

Macias Construction Company

Macias Construction Company

Yorktown TX 78164
General Contractors, Fences & Gates

Macias Construction Company, based in Yorktown, TX, provides expert general contracting services with a focus on fences and gates. Located near the Yorktown Memorial Hospital and the historic downtown...

Bullhaus Custom Construction

Bullhaus Custom Construction

Victoria TX 77905
General Contractors, Fences & Gates, Decks & Railing

Bullhaus Custom Construction, based in Victoria, TX, offers comprehensive remodeling and construction services for homeowners. We specialize in bathroom and kitchen renovations, as well as installing ...

BIGTEX HANDYMAN SERVICE'S

BIGTEX HANDYMAN SERVICE'S

Goliad TX 77963
Handyman, Fences & Gates, Painters

BIGTEX HANDYMAN SERVICES in Goliad, TX, provides reliable handyman, fencing, and painting solutions for local homeowners and businesses. Located near the historic Goliad State Park and courthouse squa...

3G Skid Steer Services

3G Skid Steer Services

Kenedy TX 78119
Shredding Services, Fences & Gates, Metal Fabricators

3G Skid Steer Services in Kenedy, TX, specializes in fencing, gates, metal fabrication, and shredding services. Located near the Kenedy County Courthouse and along Highway 181, the business addresses ...

Macias Fencing CO

Macias Fencing CO

711 TX-72, Yorktown TX 78164
Fences & Gates

Macias Fencing CO serves homeowners in Yorktown, TX, providing reliable fence and gate solutions. The local climate often causes wood fence warping from the intense heat and broken gate latches from d...

4B Welding & Fabrication Services

4B Welding & Fabrication Services

199 Cr 348, Orange Grove TX 78372
Metal Fabricators, Fences & Gates, Holiday Decorating Services

4B Welding & Fabrication Services, based in Orange Grove, TX, specializes in metal fabrication, custom fences and gates, and holiday decorating services. For local homeowners and businesses, a common ...

JJ Welding

JJ Welding

Charlotte TX 78011
Metal Fabricators, Fences & Gates

JJ Welding serves property owners in Charlotte, TX, and the surrounding Atascosa County area, offering metal fabrication and fence/gate services. Located just off US-181 near the historic downtown squ...



Estimated Fencing Costs in Sam Rayburn, TX

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$879 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sam Rayburn. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Can I have an automatic gate for my pool area?

Yes, but the gate system must integrate with pool safety codes. Under IRC Appendix AG, any gate accessing a pool must be self-closing, self-latching, and a minimum of 48 inches high. In 2026, we use low-voltage IoT operators with integrated sensors that log every latch event. This creates an audit trail, meeting modern liability standards for Texas homeowners and the low-to-moderate smart gate trend in the area.

How deep should my fence posts be set in Sam Rayburn?

All posts in Sam Rayburn Residential require a minimum 12-inch footing depth to pass below the local frost line. Shallow posts will fail due to frost heave, which lifts footings and shatters concrete. This is a non-negotiable IRC standard. For 8-foot structures, we typically embed posts 30 inches deep to achieve required stability against the 115 MPH V-ult wind rating.

What is the best fence material for this area?

Material selection is critical. Sam Rayburn has a Very Heavy termite risk and a Moderate soil corrosivity index. Pressure-treated Southern Yellow Pine is the standard for wood, with borate treatment for termites. For metal, use only hot-dip galvanized or aluminum fasteners. Inferior hardware will rust, causing unsightly streaks and structural failure at the bracket connections within a few years.

What steps are required before you dig?

State law requires a Texas811 utility locate request at least two business days before excavation. Hitting a gas, water, or fiber line in Sam Rayburn Residential is a major liability involving repair costs and fines. We manage this process and all related permit office paperwork directly. The city will inspect the footing depth and setback before we proceed with the installation.

Is a standard fence strong enough for the wind here?

No. The 115 MPH V-ult wind speed rating dictates the structural design. A basic 8-foot panel will fail. We engineer for this by reducing standard post spacing from 8 feet to 6 feet, using 6x6 posts instead of 4x4, and specifying ASCE 7-22-rated hurricane brackets. This system is designed to survive peak storm season gusts, especially for properties with higher exposure near the Sam Rayburn Dam.

How soon can you start a project in my neighborhood?

Our standard consultation dispatch is 35-45 minutes. Our crew routes from the Sam Rayburn Dam area via US-96 to your property in Sam Rayburn Residential. After the site survey and contract signing, typical lead time for material procurement and permit approval is 10-14 business days before physical work begins. The local labor rate averages $32 per hour for skilled installation.

Do I need to tell my neighbor before building a fence?

Yes. Texas Property Code Chapter 247, the 'Good Neighbor' law, requires written notice to all adjoining property owners before replacing or building a shared boundary fence in Sam Rayburn. In 2026, this notice must be sent via certified mail or personal delivery at least 30 days prior to the start of work. This law prevents disputes over partition fence costs and property lines.

What are the height and placement rules for my fence?

Sam Rayburn zoning limits fence height to 4 feet in front yards and 8 feet in rear yards. A 0-foot setback allows building directly on your property line. For corner lots, a clear 'sight triangle' is mandatory. This means no obstructions over 3 feet high within 25 feet of the intersection, especially critical for lots near US-96 to maintain driver visibility and meet municipal safety codes.



Scroll to Top
CALL US NOW