Top Fencing Companies in Pasco, WA, 99301 | Compare & Call
There are 233 fencing companies server in Pasco WA
CEFC Services, based in Spanaway, WA, provides reliable fencing, roofing, and siding solutions to homeowners across the South Sound. With years of hands-on experience, the team specializes in fence in...
Tasel Fence is a trusted fence and gate contractor serving Spanaway, WA, and surrounding areas. Located near Spanaway Lake and Pacific Highway, they specialize in fence installation, repair, and gate ...
NW Carpenter in Tacoma, WA, specializes in fences, gates, decks, and railing for local homeowners. Based near the Proctor District and a short drive from Point Defiance Park, the team understands how ...
Common Ground Fence serves Olympia, WA, and the surrounding Thurston County area. We specialize in fence and gate installation, repair, and finishing services. Our team understands the local weather p...
Freedom Fence and Home LLC, based in Chehalis, WA, provides professional fence and gate services for residential, commercial, and industrial properties. Our team delivers reliable installation, repair...
Outer Landscaping LLC has served Belfair, WA, for many years, offering a full range of landscaping, fence, and gate services. From earthmoving and retaining walls to irrigation design and tree care, w...
J&L Siding is a locally owned and operated company serving Parkland, WA, specializing in siding, decks and railing, and fences and gates. Located near Pacific Lutheran University and Parkland Prairie,...
Ripple Construction, based in Lacey, WA, is a general contracting service founded by two union journeymen with deep expertise in structural fabrication and industrial carpentry. With 12 and 11 years o...
Rain City Home Renovations is a family-owned business serving Spanaway, WA, with over eight years of experience in home improvement. We specialize in fences and gates, painting (interior and exterior)...
Evergreen Construction & Landscaping
Evergreen Construction & Landscaping has been a trusted name in Tacoma, WA, since 1996, offering general contracting, fencing, gates, and deck services. Our team works with homeowners from the initial...
Estimated Fencing Costs in Pasco, WA
Common Questions
Why do I need deep concrete footings for my fence posts in Pasco?
The IRC requires fence post footings to extend below the local frost line. Pasco's 24-inch frost depth means soil freezes and expands each winter. Posts set above this line will be forced upward by frost heave, causing misalignment and failure. Proper footings below 24 inches provide permanent stability.
Am I required to notify my neighbor before building a fence in Pasco?
Yes. Washington's Good Neighbor Fence Act (RCW 16.60.020) requires written notice to adjoining landowners at least 30 days before replacing or altering a shared partition fence. In Pasco, this 2026 legal requirement also allows for cost-sharing agreements. Failure to notify can result in liability.
How soon can you provide a consultation and estimate?
We typically dispatch for a site consultation within 48 hours. Our route from Pasco City Hall via US-395 to most Downtown Pasco properties results in a 15-20 minute response time. The consultation includes a zoning review, wind load assessment, and material compatibility analysis, with a detailed quote provided within 24 hours.
Can a smart gate meet pool safety codes?
Yes. Modern IoT-integrated gate systems with automatic self-closing and latching mechanisms can be engineered to meet the IBC/IRC Appendix AG pool barrier code. These systems provide the required 48-inch minimum height and positive latching, while audit logs from smart locks offer liability protection for Washington homeowners.
What fencing materials hold up best to Pasco's soil and pests?
Pasco's moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks. With a slight to moderate termite risk, pressure-treated wood or composite materials are advised. Avoid untreated wood in direct ground contact. Material compatibility between posts, fasteners, and panels prevents premature failure.
How do you design a fence to withstand Tri-Cities wind storms?
Pasco's 105 MPH V-ult wind speed rating dictates the structural design. This engineering standard requires closer post spacing (often 6 feet on-center or less), deeper concrete footings, and wind-rated brackets. A fence built to ASCE 7-22 standards for this wind load will survive peak storm season gusts without panel failure or overturning.
What is required before you start digging fence post holes?
Washington 811 utility locate service is mandatory and free. In Downtown Pasco, hitting a buried gas, fiber, or power line is a major financial and safety liability. We manage the 811 ticket and coordinate with the Pasco permit office to ensure all zoning and engineering approvals are cleared before any equipment arrives.
What are the height and setback rules for a fence on my property?
Pasco zoning limits fences to 3 feet in front yards and 6 feet in rear/side yards, with a 0-foot setback onto your property line. For corner lots, especially near high-traffic corridors like US-395, 'sight triangle' regulations apply. No obstruction over 3 feet high is permitted within 20 feet of the intersection corner to maintain driver visibility.