Top Fencing Companies in Pasco, WA, 99301 | Compare & Call
There are 233 fencing companies server in Pasco WA
Newman Fence & Deck in Yelm, WA builds and repairs wood and composite decks, and installs all types of residential and commercial fencing—cedar, chain link, vinyl, ornamental iron, and farm fencing. T...
Kneeland Landscaping has been serving Olympia, WA, and the surrounding Thurston County area for over 20 years. We specialize in comprehensive outdoor solutions, from landscape design and installation ...
Since 1999, Fenceco Inc. has been a family-owned leader in commercial and residential fencing solutions in Tacoma, WA. We serve everyone from large corporations to local homeowners, ensuring each proj...
Estimated Fencing Costs in Pasco, WA
Common Questions
Why do I need deep concrete footings for my fence posts in Pasco?
The IRC requires fence post footings to extend below the local frost line. Pasco's 24-inch frost depth means soil freezes and expands each winter. Posts set above this line will be forced upward by frost heave, causing misalignment and failure. Proper footings below 24 inches provide permanent stability.
Am I required to notify my neighbor before building a fence in Pasco?
Yes. Washington's Good Neighbor Fence Act (RCW 16.60.020) requires written notice to adjoining landowners at least 30 days before replacing or altering a shared partition fence. In Pasco, this 2026 legal requirement also allows for cost-sharing agreements. Failure to notify can result in liability.
How soon can you provide a consultation and estimate?
We typically dispatch for a site consultation within 48 hours. Our route from Pasco City Hall via US-395 to most Downtown Pasco properties results in a 15-20 minute response time. The consultation includes a zoning review, wind load assessment, and material compatibility analysis, with a detailed quote provided within 24 hours.
Can a smart gate meet pool safety codes?
Yes. Modern IoT-integrated gate systems with automatic self-closing and latching mechanisms can be engineered to meet the IBC/IRC Appendix AG pool barrier code. These systems provide the required 48-inch minimum height and positive latching, while audit logs from smart locks offer liability protection for Washington homeowners.
What fencing materials hold up best to Pasco's soil and pests?
Pasco's moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks. With a slight to moderate termite risk, pressure-treated wood or composite materials are advised. Avoid untreated wood in direct ground contact. Material compatibility between posts, fasteners, and panels prevents premature failure.
How do you design a fence to withstand Tri-Cities wind storms?
Pasco's 105 MPH V-ult wind speed rating dictates the structural design. This engineering standard requires closer post spacing (often 6 feet on-center or less), deeper concrete footings, and wind-rated brackets. A fence built to ASCE 7-22 standards for this wind load will survive peak storm season gusts without panel failure or overturning.
What is required before you start digging fence post holes?
Washington 811 utility locate service is mandatory and free. In Downtown Pasco, hitting a buried gas, fiber, or power line is a major financial and safety liability. We manage the 811 ticket and coordinate with the Pasco permit office to ensure all zoning and engineering approvals are cleared before any equipment arrives.
What are the height and setback rules for a fence on my property?
Pasco zoning limits fences to 3 feet in front yards and 6 feet in rear/side yards, with a 0-foot setback onto your property line. For corner lots, especially near high-traffic corridors like US-395, 'sight triangle' regulations apply. No obstruction over 3 feet high is permitted within 20 feet of the intersection corner to maintain driver visibility.
