Top Fencing Companies in Tacoma, WA, 98401 | Compare & Call
There are 235 fencing companies server in Tacoma WA
Olympic Fencing Solutions has been serving Tacoma and the Greater Puget Sound region for over 15 years, providing reliable fence, gate, and deck services for both residential and commercial properties...
Fences NW, based in Mill Creek, has been building fences and decks since 2016 with a focus on quality materials, clean work, and reliability. After navigating industry challenges like rising costs and...
Gate Technologies, based in Auburn, WA, has been a trusted provider of fence and gate services for nearly a decade. As a licensed, bonded, and insured general and specialty electrical contractor, they...
Rick's Landscaping & Construction
Rick's Landscaping & Construction, based in Lynnwood, WA, is a licensed, bonded, and insured full-service company offering landscaping, excavation, and fence and gate services. We work closely with ea...
Ivan, manager of Tidy Beaver Fencing in Redmond, WA, leads a team dedicated to redefining fence and deck installation. Founded in 2024, our company prioritizes quality, customer experience, and speed....
Rock Solid Fence is a family-owned fence company serving Marysville, WA, since 2016. Founded by a husband-and-wife team with years of hands-on experience, we specialize in installing and repairing vin...
PNW Legacy Fencing is your trusted local expert for fences, gates, decks, and railing in Lake Stevens, WA. We specialize in fence and gate installation, painting/staining, and weatherproofing to prote...
All In One Landscaping And Fencing
All In One Landscaping And Fencing in Mill Creek, WA, owned by Fernando, provides a full range of outdoor services for local homeowners. From artificial turf and patios to driveways and walkways, the ...
Constellation Fences, based in Kent, WA, specializes in custom iron gates and iron fence installation for both residential and commercial properties. Our team focuses on high-quality fabrication and d...
JV Fencing serves Stanwood, WA, providing expert fence and gate solutions for local homeowners. Common issues like privacy fence panel damage from wind or wear and broken gate hinges are addressed pro...
Estimated Fencing Costs in Tacoma, WA
Common Questions
Am I legally required to notify my neighbor before building a fence?
Yes. For any fence replacing a shared boundary, Washington's Good Neighbor Fence Law (RCW 16.60.020) requires written notice to adjoining landowners. As of 2026, Tacoma enforces this strictly to define shared cost liability before construction starts.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic, self-latching mechanisms satisfy the 2026 IBC Section 3109 and IRC Appendix AG requirements for barrier pools. They provide audit trails and remote monitoring, which is a best practice for Washington homeowner liability.
What fencing materials hold up best in Tacoma's soil?
Material compatibility is critical due to moderate soil corrosivity and slight-to-moderate termite risk. Pressure-treated wood or composite materials are standard. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corroding hardware, which is a common failure point.
How soon can a consultation be scheduled in the Uptown district?
Consultations are typically scheduled within 48 hours. Our route from Point Defiance Park via I-5 to the Uptown neighborhood allows for a 25-35 minute response window. We confirm the appointment after reviewing your site's zoning and survey details.
How deep should fence posts be set in Tacoma?
Posts must be set below the 12-inch frost line. In the Uptown neighborhood, frost heave will push posts set in shallow footings out of alignment. IRC Section R403.1.4 requires footings to extend a minimum of 12 inches below undisturbed soil to prevent structural failure from freeze-thaw cycles.
What are Tacoma's height and setback rules for fences?
Zoning limits are 3.5 feet for front yards and 6 feet for rear yards. The setback is 0 feet, allowing construction on the property line. Corner lots must maintain a clear 'sight triangle' at intersections; a fence near I-5 on-ramps cannot obstruct driver visibility, per Tacoma Municipal Code.
Is my fence designed for Tacoma's wind loads?
Fences in Tacoma must be engineered for a V-ult wind speed of 105 mph per ASCE 7-22 standards. This rating dictates maximum post spacing, concrete footing mass, and bracket strength. Proper design prevents failure during our peak storm season, especially in exposed areas.
What is required before digging fence post holes?
You must contact Washington 811 for a utility locate at least two business days before excavation. Hitting a buried line in Uptown is a major liability involving repair costs and fines. A professional manages this and pulls the required right-of-way permit from the City of Tacoma Permit Office.
