Top Fencing Companies in Tacoma, WA, 98401 | Compare & Call
There are 235 fencing companies server in Tacoma WA
Fencetopia has been a trusted fence and gate installer in Bothell since 2010. We specialize in vinyl, chain link, and ornamental fences, along with manual and automatic gate systems. Every new install...
The People's Fence & More in Monroe, WA, started in 2019 by Jose Perez, is a small local business built on hands-on experience. With over seven years in the field, Jose began by struggling with fence ...
Rogue Fabricators
Rogue Fabricators Inc. is a custom metal fabrication company based in Poulsbo, WA. With over 15 years of experience, our industry-certified staff specializes in railings, structural, architectural, ar...
Escapes Fence & Deck, a family-owned and veteran-led company founded in 2008, has built a reputation for quality outdoor improvements across Washington State. Based in Arlington, we specialize in fenc...
Eagle Eye Construction serves homeowners in Lynnwood, WA, specializing in fences, gates, decks, and patio coverings. Located near Alderwood Mall and just off I-5, we’re a short drive from neighborhood...
Legacy Fenceworks, a family-owned business in Anacortes, WA, brings over 10 years of hands-on experience to fence, gate, and deck projects. We specialize in custom builds, repairs, and replacements, i...
New Ridge Fencing LLC, based in Woodinville, WA, is a family-owned fencing contractor established in 2021 after the owner gained over eight years of industry experience. Licensed, bonded, and BBB-accr...
Green Ranch Landscaping Service has served Marysville, WA, for over 10 years, offering a full range of landscaping, hardscaping, fencing, and masonry solutions. We work closely with each client to des...
B&M Modern Works builds premium decks and fences for homeowners in Everett, WA. We focus on reliable construction and a clean, modern look. Our projects are known for solid structure, attention to det...
SoundView Fence in Tacoma, WA, has been a trusted provider of fence and gate services for residential and commercial properties. As a local company, we understand the specific needs of Tacoma homeowne...
Estimated Fencing Costs in Tacoma, WA
Common Questions
Am I legally required to notify my neighbor before building a fence?
Yes. For any fence replacing a shared boundary, Washington's Good Neighbor Fence Law (RCW 16.60.020) requires written notice to adjoining landowners. As of 2026, Tacoma enforces this strictly to define shared cost liability before construction starts.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic, self-latching mechanisms satisfy the 2026 IBC Section 3109 and IRC Appendix AG requirements for barrier pools. They provide audit trails and remote monitoring, which is a best practice for Washington homeowner liability.
What fencing materials hold up best in Tacoma's soil?
Material compatibility is critical due to moderate soil corrosivity and slight-to-moderate termite risk. Pressure-treated wood or composite materials are standard. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corroding hardware, which is a common failure point.
How soon can a consultation be scheduled in the Uptown district?
Consultations are typically scheduled within 48 hours. Our route from Point Defiance Park via I-5 to the Uptown neighborhood allows for a 25-35 minute response window. We confirm the appointment after reviewing your site's zoning and survey details.
How deep should fence posts be set in Tacoma?
Posts must be set below the 12-inch frost line. In the Uptown neighborhood, frost heave will push posts set in shallow footings out of alignment. IRC Section R403.1.4 requires footings to extend a minimum of 12 inches below undisturbed soil to prevent structural failure from freeze-thaw cycles.
What are Tacoma's height and setback rules for fences?
Zoning limits are 3.5 feet for front yards and 6 feet for rear yards. The setback is 0 feet, allowing construction on the property line. Corner lots must maintain a clear 'sight triangle' at intersections; a fence near I-5 on-ramps cannot obstruct driver visibility, per Tacoma Municipal Code.
Is my fence designed for Tacoma's wind loads?
Fences in Tacoma must be engineered for a V-ult wind speed of 105 mph per ASCE 7-22 standards. This rating dictates maximum post spacing, concrete footing mass, and bracket strength. Proper design prevents failure during our peak storm season, especially in exposed areas.
What is required before digging fence post holes?
You must contact Washington 811 for a utility locate at least two business days before excavation. Hitting a buried line in Uptown is a major liability involving repair costs and fines. A professional manages this and pulls the required right-of-way permit from the City of Tacoma Permit Office.
