Top Fencing Companies in Glendale, WI, 53209 | Compare & Call
There are 34 fencing companies server in Glendale WI
Lawver's Underground Pet Fences, serving Janesville and all of Southern Wisconsin since 2003, specializes in installing and repairing underground invisible dog fences. Founded by a retired police offi...
HBC Home Improvements, serving Orfordville, WI, brings three years of experience transforming outdoor spaces with quality craftsmanship. As a licensed and insured contractor, we specialize in deck con...
Struck & Irwin Fence, a Middleton, WI staple since 1947, has been providing expert fencing solutions for over 75 years. Recently acquired by Seth Nicholson of The Bruce Company, the business continues...
American Fence Co is a family-owned fence contractor serving Madison, WI, and surrounding communities like Middleton, Sun Prairie, and the UW-Madison campus area. Specializing in residential and comme...
Madison Fence Company, based in Middleton, WI, is a family-owned business that has helped hundreds of homeowners, property managers, and general contractors across the greater Madison area achieve pri...
Qual Line Fence Corp., a family-owned business founded in 1956 by Ray Statz, has been serving southern Wisconsin from Waunakee for over six decades. Now led by CEO Al Statz, the company specializes in...
Since 1995, Ideal Fence of Madison has been installing custom wood and vinyl fences in the Madison area and across two Wisconsin locations. Owner Scott and his team take pride in getting out of the of...
Wrought Iron Fence of Madison provides durable, custom-crafted fencing and gate solutions for residential and commercial properties in Madison, WI. Serving neighborhoods from the Capitol Square to the...
High Point Fencing, based in Verona, WI, was founded by a former Registered Nurse who brings the same trust, responsibility, and attention to detail from healthcare to fencing. Serving the Madison are...
Simmons Fence & Specialty Products, L.L.C., based in Janesville, WI, is a full-service fencing contractor serving Janesville, Beloit, Madison, Evansville, Lake Geneva, Milton, and surrounding Wisconsi...
Estimated Fencing Costs in Glendale, WI
Q&A
How is my fence designed to handle high winds?
Glendale's V-ult wind speed rating is 115 MPH. This engineering standard dictates post spacing, concrete footing diameter, and bracket strength. A fence not designed to ASCE 7-22 wind load calculations will fail during peak storm season gusts, especially in exposed areas near Kletzsch Park. Proper design resists overturning and panel blow-out.
What fencing material is best for Glendale's soil and insect conditions?
Soil corrosivity is Moderate. Use G90 galvanized or powder-coated steel posts and fasteners. Aluminum or steel is recommended; pressure-treated wood is acceptable but requires stainless steel or coated fasteners to prevent rust streaks. Termite risk is Slight/Moderate, making metal posts a superior long-term choice over untreated wood in direct ground contact.
How soon can a crew start a project in Bayside Woods?
After a signed contract and permit approval, mobilization typically occurs within 7-10 business days. Our route from the Glendale office near Kletzsch Park uses I-43 for efficient dispatch, ensuring a site consultation in your Bayside Woods neighborhood within the 15-25 minute travel window. Current labor rates average $45/hour for skilled installation.
What are the height and placement rules for a fence on my Glendale property?
Zoning height limits are 4 feet in the front yard and 6 feet in the rear. The setback regulation allows a 0-foot offset on the property line, but the finished architectural side must face the neighbor. For corner lots, maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high—especially critical near I-43 for driver visibility.
Am I legally required to tell my neighbor I'm replacing our shared fence?
Yes. Wisconsin Statute 90.03, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners for a shared boundary fence. In Glendale, this 2026 legal requirement is absolute. Provide notice 15 days before work begins. It establishes cost-sharing rights and prevents neighbor disputes in Bayside Woods.
Why do fence posts in Bayside Woods need footings so deep?
The frost line depth in Glendale is 48 inches. Footings must extend below this depth to prevent frost heave, which lifts posts, warps panels, and breaks connections. Posts set in shallow concrete will fail within two Wisconsin winters. IRC Section R403.1.4 mandates this for structural stability against ground freeze-thaw cycles.
Can I have a smart gate if I also have a pool?
Yes. Modern cellular-based access control integrates with ICC-ISPSC compliant pool safety gates. The system must ensure the gate is self-closing and self-latching at all times, meeting the 48-inch minimum height. Integrated IoT latches provide audit trails, meeting updated Wisconsin liability standards for access control and child safety barriers.
What is required before digging fence post holes?
You must contact Diggers Hotline (Wisconsin 811) at least three business days before excavation. Hitting a buried utility line in Bayside Woods carries major financial and safety liability. We manage the permit office paperwork for Glendale, which includes the utility locate confirmation, ensuring the project meets all 2026 site preparation codes.
