Top Fencing Companies in Glendale, WI, 53209 | Compare & Call
There are 34 fencing companies server in Glendale WI
Reynolds Fencing Supply has been serving Hollandale, WI and the surrounding areas since 1932. We are a full-service fencing resource offering a wide range of materials including wood, metal, and barbe...
Bello Property Services is a Janesville-based landscaping, masonry, and fencing company serving homeowners across Rock County. Located just off Highway 14 between the Rock County Airport and the Janes...
3B’S Construction & Maintenance in Platteville, WI, is a local contractor offering a full range of construction and maintenance services. From new home builds and remodeling to routine repairs, the te...
Madison Fencing Contractors, based in Madison, WI, specializes in fence and gate installation, repair, painting or staining, and weatherproofing for residential and commercial properties. With over a ...
Stella Construction serves Sun Prairie, WI, as a full-service general contractor specializing in remodeling, fencing, and flooring. Many local homes face fencing issues: weather damage, aging wood, or...
Double D Home Services serves Fort Atkinson and surrounding areas in Jefferson County, tackling old fence removal, flooring tear-out, and general junk pickup. Common local fencing issues often involve...
Hauser Contractors, based in Monona, WI, provides general contracting services including bathroom and kitchen remodeling, deck construction and repair, and fence and gate installation. A common local ...
CB Silt Fence LLC, based in Lodi, WI, provides professional landscaping, fencing, and snow removal services across Columbia, Dane, Sauk, Dodge, and Richland counties. With over a decade of experience,...
Postville Blacksmith
Postville Blacksmith Shop in Blanchardville, WI, specializes in custom architectural metalwork, decks, railings, fences, and gates. Serving the Blanchardville area, we help homeowners boost curb appea...
N&S Fence is a locally owned fence contractor based in Edgerton, WI, serving Rock, Dane, Jefferson, and Green counties. We specialize in a full range of fencing solutions, including aluminum vinyl, ch...
Estimated Fencing Costs in Glendale, WI
Q&A
How is my fence designed to handle high winds?
Glendale's V-ult wind speed rating is 115 MPH. This engineering standard dictates post spacing, concrete footing diameter, and bracket strength. A fence not designed to ASCE 7-22 wind load calculations will fail during peak storm season gusts, especially in exposed areas near Kletzsch Park. Proper design resists overturning and panel blow-out.
What fencing material is best for Glendale's soil and insect conditions?
Soil corrosivity is Moderate. Use G90 galvanized or powder-coated steel posts and fasteners. Aluminum or steel is recommended; pressure-treated wood is acceptable but requires stainless steel or coated fasteners to prevent rust streaks. Termite risk is Slight/Moderate, making metal posts a superior long-term choice over untreated wood in direct ground contact.
How soon can a crew start a project in Bayside Woods?
After a signed contract and permit approval, mobilization typically occurs within 7-10 business days. Our route from the Glendale office near Kletzsch Park uses I-43 for efficient dispatch, ensuring a site consultation in your Bayside Woods neighborhood within the 15-25 minute travel window. Current labor rates average $45/hour for skilled installation.
What are the height and placement rules for a fence on my Glendale property?
Zoning height limits are 4 feet in the front yard and 6 feet in the rear. The setback regulation allows a 0-foot offset on the property line, but the finished architectural side must face the neighbor. For corner lots, maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high—especially critical near I-43 for driver visibility.
Am I legally required to tell my neighbor I'm replacing our shared fence?
Yes. Wisconsin Statute 90.03, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners for a shared boundary fence. In Glendale, this 2026 legal requirement is absolute. Provide notice 15 days before work begins. It establishes cost-sharing rights and prevents neighbor disputes in Bayside Woods.
Why do fence posts in Bayside Woods need footings so deep?
The frost line depth in Glendale is 48 inches. Footings must extend below this depth to prevent frost heave, which lifts posts, warps panels, and breaks connections. Posts set in shallow concrete will fail within two Wisconsin winters. IRC Section R403.1.4 mandates this for structural stability against ground freeze-thaw cycles.
Can I have a smart gate if I also have a pool?
Yes. Modern cellular-based access control integrates with ICC-ISPSC compliant pool safety gates. The system must ensure the gate is self-closing and self-latching at all times, meeting the 48-inch minimum height. Integrated IoT latches provide audit trails, meeting updated Wisconsin liability standards for access control and child safety barriers.
What is required before digging fence post holes?
You must contact Diggers Hotline (Wisconsin 811) at least three business days before excavation. Hitting a buried utility line in Bayside Woods carries major financial and safety liability. We manage the permit office paperwork for Glendale, which includes the utility locate confirmation, ensuring the project meets all 2026 site preparation codes.
