Top Fencing Companies in Holland, WI, 54636 | Compare & Call
There are 85 fencing companies server in Holland WI
Leading Edge Fences is a family-owned fencing and deck company based in Marshall, WI, with roots stretching back three generations. Kyle, our third-generation fencer and owner, brings over a decade of...
Dane County Fence & Deck serves Madison and the surrounding Dane County area with residential and commercial fence and deck services. The company specializes in custom fence installations, deck constr...
American Fence Co is a family-owned fence contractor serving Madison, WI, and surrounding communities like Middleton, Sun Prairie, and the UW-Madison campus area. Specializing in residential and comme...
Madison Fence Company, based in Middleton, WI, is a family-owned business that has helped hundreds of homeowners, property managers, and general contractors across the greater Madison area achieve pri...
Qual Line Fence Corp., a family-owned business founded in 1956 by Ray Statz, has been serving southern Wisconsin from Waunakee for over six decades. Now led by CEO Al Statz, the company specializes in...
Since 1995, Ideal Fence of Madison has been installing custom wood and vinyl fences in the Madison area and across two Wisconsin locations. Owner Scott and his team take pride in getting out of the of...
Action Fence has been serving Madison, WI, for over 35 years, specializing in fence and gate installation, repair, staining, and weatherproofing for both residential and commercial properties. We work...
DeSelle Fence Co. has been serving Madison, WI, for over 35 years as a family-owned fencing contractor. Specializing in custom wood, vinyl, chain link, and ornamental iron fences, they provide install...
Good Neighbor Fencing has been serving Middleton, WI, and the surrounding areas since 2014, offering custom fencing solutions for both residential and commercial properties. We specialize in installin...
AmeriFence Corporation of Madision
AmeriFence Corporation of Madison serves McFarland and the surrounding area from its facility at 4701 McFarland Court. As a full-service fencing contractor, we offer professional installation, repair,...
Estimated Fencing Costs in Holland, WI
Questions and Answers
Is a standard fence design strong enough for Holland's wind loads?
No. The 115 MPH V-ult wind speed rating dictates engineering. Standard 8-foot post spacing often fails. Design must use reduced post spacing, continuous concrete footings below frost, and wind-rated brackets to survive peak storm season gusts, which are amplified near open areas around I-43.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Wisconsin Statute 90.03, the 'good neighbor' law, requires written notice to adjoining landowners before constructing or replacing a partition fence on a shared boundary. As of 2026, this formal notification is a prerequisite in Holland to avoid legal disputes over shared maintenance costs.
What is required before digging fence post holes?
You must contact Diggers Hotline (811) at least three business days before excavation. Hitting a utility line in Holland Center is a major financial and safety liability. A proper installation manages this call and all necessary Town Hall permit office paperwork before any equipment arrives on site.
How deep do fence posts need to be in Holland, WI, to prevent frost heave?
Posts must be set below the 48-inch frost line. The IRC requires this depth to prevent frost heave from lifting posts out of the ground. In Holland Center, soil freeze-thaw cycles will fail any footing set above this line, causing racking and collapse.
How soon can a consultation be scheduled, and what is your response route?
Consultations are typically scheduled within 48 hours. For Holland Center, the route originates at the Holland Town Hall, proceeds via I-43, and results in a 25 to 35-minute travel time for an on-site structural and zoning assessment.
How does Holland's soil and termite risk affect fencing material choice?
The moderate soil corrosivity index and slight-to-moderate termite risk require material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks from degrading the fence's appearance and structure.
What are the height and setback rules for fences in Holland, WI?
Zoning limits are 4 feet tall in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, maintain a clear 'sight triangle' at intersections. Proximity to I-43 demands strict adherence to visibility rules to prevent traffic hazards.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic self-latching mechanisms can be configured to comply with the International Swimming Pool and Spa Code (ISPSC). This integration is a moderate trend in 2026, providing both access control and critical liability protection for Wisconsin homeowners with pools.
