Top Fencing Companies in Holland, WI, 54636 | Compare & Call
There are 85 fencing companies server in Holland WI
Wrought Iron Fence of Madison provides durable, custom-crafted fencing and gate solutions for residential and commercial properties in Madison, WI. Serving neighborhoods from the Capitol Square to the...
High Point Fencing, based in Verona, WI, was founded by a former Registered Nurse who brings the same trust, responsibility, and attention to detail from healthcare to fencing. Serving the Madison are...
Simmons Fence & Specialty Products, L.L.C., based in Janesville, WI, is a full-service fencing contractor serving Janesville, Beloit, Madison, Evansville, Lake Geneva, Milton, and surrounding Wisconsi...
Reynolds Fencing Supply has been serving Hollandale, WI and the surrounding areas since 1932. We are a full-service fencing resource offering a wide range of materials including wood, metal, and barbe...
Solid Fencing Company is a locally owned fencing contractor based in Madison, WI, serving residential and commercial clients throughout Dane County. With a focus on chain link, wood, aluminum, and ste...
Pro Home Maintenance Solutions is your trusted local handyman, fencing, and deck expert in Verona, WI. We specialize in repairing, installing, and weatherproofing fences and gates—solving common issue...
Bello Property Services is a Janesville-based landscaping, masonry, and fencing company serving homeowners across Rock County. Located just off Highway 14 between the Rock County Airport and the Janes...
Stark Home Solutions has been serving Madison, WI, since 2015, offering a comprehensive range of home services including fencing and gate installation, landscaping, snow removal, dumpster rentals, gut...
3B’S Construction & Maintenance in Platteville, WI, is a local contractor offering a full range of construction and maintenance services. From new home builds and remodeling to routine repairs, the te...
Eastside Carpentry serves Madison, WI, specializing in carpentry, fencing, and cabinetry. Located near the Capitol Square and the University of Wisconsin campus, the team frequently addresses the area...
Estimated Fencing Costs in Holland, WI
Questions and Answers
Is a standard fence design strong enough for Holland's wind loads?
No. The 115 MPH V-ult wind speed rating dictates engineering. Standard 8-foot post spacing often fails. Design must use reduced post spacing, continuous concrete footings below frost, and wind-rated brackets to survive peak storm season gusts, which are amplified near open areas around I-43.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Wisconsin Statute 90.03, the 'good neighbor' law, requires written notice to adjoining landowners before constructing or replacing a partition fence on a shared boundary. As of 2026, this formal notification is a prerequisite in Holland to avoid legal disputes over shared maintenance costs.
What is required before digging fence post holes?
You must contact Diggers Hotline (811) at least three business days before excavation. Hitting a utility line in Holland Center is a major financial and safety liability. A proper installation manages this call and all necessary Town Hall permit office paperwork before any equipment arrives on site.
How deep do fence posts need to be in Holland, WI, to prevent frost heave?
Posts must be set below the 48-inch frost line. The IRC requires this depth to prevent frost heave from lifting posts out of the ground. In Holland Center, soil freeze-thaw cycles will fail any footing set above this line, causing racking and collapse.
How soon can a consultation be scheduled, and what is your response route?
Consultations are typically scheduled within 48 hours. For Holland Center, the route originates at the Holland Town Hall, proceeds via I-43, and results in a 25 to 35-minute travel time for an on-site structural and zoning assessment.
How does Holland's soil and termite risk affect fencing material choice?
The moderate soil corrosivity index and slight-to-moderate termite risk require material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks from degrading the fence's appearance and structure.
What are the height and setback rules for fences in Holland, WI?
Zoning limits are 4 feet tall in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, maintain a clear 'sight triangle' at intersections. Proximity to I-43 demands strict adherence to visibility rules to prevent traffic hazards.
Do smart gates meet pool safety and liability standards?
Yes. Modern IoT-integrated gate systems with automatic self-latching mechanisms can be configured to comply with the International Swimming Pool and Spa Code (ISPSC). This integration is a moderate trend in 2026, providing both access control and critical liability protection for Wisconsin homeowners with pools.
